Send me a message and tell me what voltage you're running. Either 48v or 52v
[Be advised: These controllers are made to order.]
If you want 'throttle only' mode in pedal assist level 0, send me a message.
UART protocol
[FIRMWARE UPDATE: Compatible with Eggrider V2 and Speeed app. Will show accurate watt & amp reading with Eggrider display when current sensing is changed to x2. Compatible with all 48/52v bafang displays.]
***THIS IS A PHYSICAL MODIFICATION***
(FOR EXPERIENCED EBIKE DIY'ERS ONLY. MUST HAVE BASIC UNDERSTANDING OF HOW EBIKE CONTROLLERS ARE INSTALLED AND OPERATED. I TAKE NO RESPONSIBILITY FOR CONTROLLER FAILURE DUE TO FAILING TO USE GEARS PROPERLY.) If you don't know how to edit controller parameters then this mod may not be for you. (Controller comes with base tune applied, ready to rock and roll.)
Capable of 60 amps max (originally 30a max pre-mod). DO NOT LIMIT AMPS!
If you want to limit amps, reduce the pedal assist level when in use. Reducing the controller's overall amps negatively effects controller performance in more than one way.
Programming cable recommended and needed to edit parameter settings unless you use an Eggrider Bluetooth display.
Watts and amps are read x2.
For example 5a = 10a, 10a = 20a, 20a = 40a, 30a = 60a, 500w = 1000w, 1000w = 2000w and so on. Eggrider display will show accurate power readings. This is how a Luna Ludicrous v1 controller operates.
This modification increases torque and acceleration. This modification is not for top speed increases. Use your gears properly and this controller will last you many miles.
I do allow for customers to send their own controllers to be modded. It's roughly half the cost of a new modded controller. Below is the listing link.
eBay fees, materials, labor, demand and availability of controller's determine the listed price. Send me a direct message if you have any questions or concerns 😁