PLEASE NOTE:
All items will be shipped and delivered by the following services: Evri,
DX, DHL and Royal Mail. The service used is dependent on location of
delivery, weight of parcel, size of parcel, value of contents and
carrier restrictions of transport.
NitroMors All Purpose Paint and Varnish Remover 4 Litre Double Strength Formula
Nitromors, latin for “death to paint”, has been synonymous with fast and effective paint and varnish removal since the 1930s. Nitromors All Purpose Paint and Varnish Remover is a fast acting dichloromethane free formula.
+ Non drip - ideal for vertical surfaces
+ Green coloured - see where you have applied it
+ Removes paint, varnish and lacquer
+ Water and solvent washable
+ Strips up to twice the paint layers and stays active longer compared to dichloromethane based paint removers
Size: 4 Litre
Coverage: 4 Litres covers up to 10m².
Please note: The tin is dented as per image
NOTE: Tests have shown that after application New Formula Nitromors takes generally 2-3 minutes longer for the paint to blister, has a longer working time, but requires fewer applications to get back to bare wood than the original Nitromors.
NEW Nitromors is not suitable for removing car paints or for contact with plastics.
Directions for use:
Preparation:
+ Wear gloves and safety goggles
+Work outside if possible
+ Ensure good ventilation when working indoors
+ Protect surrounding area with polythene sheeting
+ Do not use in direct sunlight
+ Not suitable for removing car paint or for contact with plastics.
Usage Instructions:
1. Pour NitroMors All Purpose Paint and Varnish Remover into overcap. Replace cap immediately. Apply a thick coat by brush with a dabbing action.
Do not brush out.
Only apply to areas up to 0.5m².
When paint has blistered (5-10 minutes) apply second coat, working into blisters. Leave for 40 minutes.
Do not allow to dry out.
2. Remove blistered/softened point with scraper or shavehook. Repeat process if necessary. Remove traces of stubborn paint by rubbing with wire wool dipped in NitroMors All Purpose Paint and Varnish Remover.
3. Wash down with detergent in cold water (use white spirit on fine woods to avoid raising the grain). Allow to dry thoroughly and rub down with fine sandpaper or wire wool.