Information：
a)Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. it will work and fit.Thank you!
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
NOTE:
1. This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID.Pls confirm the item if it can matches your car before you purchase.
2. Please double check local traffic rules before order, ice blue bulbs are illegal to use in some of the states.
Description
Headlight 9005+H11
1. Condition: 100% Brand New / Never Used
2. Voltage: DC 9-32V
3. Headlight Power: 100W
3. Fog Power: 50W
4. IP Rate: IP67
5. LED type: 2-sides CSP LED（Headlight,Plug&Play）
6. Beam Angle: 360°
7. Color Temperature: 6000K White
8. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
9. Operating Life: >50000hrs
10. Operating Temperature: -40 - +80°C
11. Application: Headlight Lights
12. Number of Bulbs: 6
13. To Fit: Headlight Kit
14. Placement on Vehicle: Front
1. This kit is for vehicles with Factory Halogen Systems, it will not work with vehicles with Factory HID.Pls confirm the item if it can matches your car before you purchase.
2. Please double check local traffic rules before order, ice blue bulbs are illegal to use in some of the states.
Description
Headlight 9005+H11
1. Condition: 100% Brand New / Never Used
2. Voltage: DC 9-32V
3. Headlight Power: 100W
3. Fog Power: 50W
4. IP Rate: IP67
5. LED type: 2-sides CSP LED（Headlight,Plug&Play）
6. Beam Angle: 360°
7. Color Temperature: 6000K White
8. Heat Dissipation Theory: Heat Pipe Technology + A380 Aluminum Heatsink
9. Operating Life: >50000hrs
10. Operating Temperature: -40 - +80°C
11. Application: Headlight Lights
12. Number of Bulbs: 6
13. To Fit: Headlight Kit
14. Placement on Vehicle: Front
Fog Light:
-Bulb Size: 9145/9006/H10
-Application: Fog Light Bulbs
-LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
- LED chip high power 100W per bulb
-Color Temperature: 6000K White
-Lumens: 5500 lumens per bulb,no blind zone
-Working Voltage: DC 12V to 24V
-No delay to light up, Faster on/off response time
-Lifespan: 80,000 working hours, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
Package Includes:
1x Pair 9005/HB3 High Beam Bulbs
1x Pair H11 Low Beam Bulbs
1x Pair 9145/H10 Fog Light Bulbs
-Bulb Size: 9145/9006/H10
-Application: Fog Light Bulbs
-LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
- LED chip high power 100W per bulb
-Color Temperature: 6000K White
-Lumens: 5500 lumens per bulb,no blind zone
-Working Voltage: DC 12V to 24V
-No delay to light up, Faster on/off response time
-Lifespan: 80,000 working hours, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
Package Includes:
1x Pair 9005/HB3 High Beam Bulbs
1x Pair H11 Low Beam Bulbs
1x Pair 9145/H10 Fog Light Bulbs
Packaging is random
SOME PROBLEMS FROM CUSTOMERS:
Q1: WHY MY LIGHTS ARE SO DIM ?
A: Most of the customers responded very brightly, and there have been a few customers who were in the same situation as you, and the reaction was not very bright. Later, after we fully understood, we found that because this light bulb is LED, the voltage requirement must reach 12-36V (brightness). brighter with higher voltage), while your raw halogen bulbs only need 9V to light up.
Because we send it out after 100% inspection before delivery, it is most likely caused by the insufficient voltage of your original lamp system. It is recommended that you or go to a professional auto repair shop to change the voltage of the bulb system, so that the lights can run brighter.
Q2: WHY THEY CANNOT BE LIGHTENED ?
A:This happens because your original halogen car lights have no positive and negative poles, but this is an LED light, which has positive and negative poles. A small number of customers (such as your car) happen to have the opposite positive and negative poles of our lights, which leads to non-lighting.
Don't worry, this situation is very easy to solve! You only need to lead a wire out of the positive and negative poles and reverse them to make the light bright. If you can't operate it yourself, we suggest that you can go to a professional auto repair shop to modify it, thank you!
Q1: WHY MY LIGHTS ARE SO DIM ?
A: Most of the customers responded very brightly, and there have been a few customers who were in the same situation as you, and the reaction was not very bright. Later, after we fully understood, we found that because this light bulb is LED, the voltage requirement must reach 12-36V (brightness). brighter with higher voltage), while your raw halogen bulbs only need 9V to light up.
Because we send it out after 100% inspection before delivery, it is most likely caused by the insufficient voltage of your original lamp system. It is recommended that you or go to a professional auto repair shop to change the voltage of the bulb system, so that the lights can run brighter.
Q2: WHY THEY CANNOT BE LIGHTENED ?
A:This happens because your original halogen car lights have no positive and negative poles, but this is an LED light, which has positive and negative poles. A small number of customers (such as your car) happen to have the opposite positive and negative poles of our lights, which leads to non-lighting.
Don't worry, this situation is very easy to solve! You only need to lead a wire out of the positive and negative poles and reverse them to make the light bright. If you can't operate it yourself, we suggest that you can go to a professional auto repair shop to modify it, thank you!