Note: in order to meet the different needs of customers, our products do not have plugs, and customers need to connect their own plugs
CBF series flameproof and explosion-proof axial-flow fans (hereinafter referred to as axial-flow fans) meet the standards and are suitable for factories and enterprises: containing. IIA, lIB, T1-T4 groups of explosive gas or vapor environment, as the ventilation and ventilation of factories and warehouses or to enhance heat dissipation.
Specification:
Color: Grey, Red
Material: Iron, Aluminum
Process: Electrostatic Spraying
Power: 120W
Voltage: 110V
Spindle Speed: 1450rpm
Air Volume: 2280m³/h
Power Source: Ac
Mounting Type: Wall Mount
Number of Fan Blades: 4
Indoor/Outdoor Usage: Indoor
Cable Outer Diameter Outlet Thread: 1/2
Explosion-proof Mark: Exdll BT4Gb
Wind Pressure: 60pa
Noise: 62dB
Package Size: 48*48*35cm/18.9*18.9*13.78in
Product Size(D*H): 35.5*27.7cm/13.98*10.91in
Inner Diameter: 30.5cm/12 in
Gross Weight: 10.67kg/23.52lbs
Net Weight: 9.45kg/20.83lbs
Features:
Product identification is clear. Clear identification of product label, explosion-proof safety sign and safety precautions
Cast aluminium fan blade design. Smooth operation, large air volume, low noise
Strong explosion-proof motor. Pure copper coil, strong sealing, high-speed operation, enough power to ensure fan blade outflow
Explosion-proof special cast iron motor housing. Hard and firm, strong corrosion resistance, not easy to oxidize
Mesh metal protective net. It is safer to prevent the fan blades from being damaged after sundries are inhaled into the fan.
Operation note:(Axial fan can be used reliably in the following environments)
A) not exceeding 2000 m above sea level;
B) operating ambient temperature - generally not lower than - 20C, not higher than + 40C;
C) the relative humidity of the surrounding air is not more than 50% (+ 25C);
D) in the factory with class II B explosive gas environment;
E) no rain, snow and other liquid invading environment;
F) Vertical or parallel to the horizontal surface to prevent tilt and rollover
G) Axial fan should be stored in warehouse with good ventilation system
H) Prevent rain and strong vibration during transportation
Package:
1 x 300mm Explosion-proof Axial Flow Fan
Notes
- Please note that the product should be used at an altitude of no more than 1.24 miles above sea level.
- Please note that the working environment temperature is generally not lower than -4℉, and not higher than 104℉, the relative humidity of the surrounding air does not exceed 50%.
- Please note that it doesn't include a plug, you should according to the wire to connect.
- Please note that the product is suitable for use in an environment free from rain, snow, and other liquids.
- Please note that the product should be used perpendicular or parallel to the horizontal plane to prevent tilting and rolling.
- Please note that the products should be stored in a warehouse with a good ventilation system.
- Please note that the transportation should be protected from rain and strong vibrations.
- Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
On Mar 12, 2026 at 00:01:38 PDT, seller added the following information: