Note:
1.Package Include:1 x Key Shell Case + 1 Set Flip Blade Pin Remover Tool
2.The pin removal tool allows you to easily transfer your existing blade onto new key fob case replacement.
3.Save Money,don't need to transfer the blade with the help of locksmith.
4.NO (electronics / transponder chip / battery), isn't a remote
5.The blade needs to be cut if you use the new flip blade.
6.NO programming needed.
7.Just put your old circuit board and chip in new shell.
Usage instruction (as the video show:)
-The magnet ensures the pin is kept in place while held inside the pin insertion tool.
-The flat ended punch ensures the pin finished home flush, allowing the blade to flip.
-The slot on your key blade (where the pin slides in) blade may need slight adjustment and we supply a needle file for you to do this.
-When installing,Rotating the case twice it puts the spring under a lot more tension and the key will flip.
2.The pin removal tool allows you to easily transfer your existing blade onto new key fob case replacement.
3.Save Money,don't need to transfer the blade with the help of locksmith.
4.NO (electronics / transponder chip / battery), isn't a remote
5.The blade needs to be cut if you use the new flip blade.
6.NO programming needed.
7.Just put your old circuit board and chip in new shell.
Usage instruction (as the video show:)
-The magnet ensures the pin is kept in place while held inside the pin insertion tool.
-The flat ended punch ensures the pin finished home flush, allowing the blade to flip.
-The slot on your key blade (where the pin slides in) blade may need slight adjustment and we supply a needle file for you to do this.
-When installing,Rotating the case twice it puts the spring under a lot more tension and the key will flip.
Specification:
Type: Flip Key Case Shell + Tool
Type: Flip Key Case Shell + Tool
Part Numbers: 13504200, 13504258, 13504205, 13504202, 13500224, 13585206, 13504199, 23335584, 13579228, 23465184, 13500221, 23335584, 13586785, 13500319, 13585209, 13504259, 13501514
fit for FCC ID: OHT01060512
Transponder chip / electronic: No
Tools: Pin Removal Tools and Needle File
5 Buttons: Lock, Unlock, Trunk release, Panic alarm
Blade: Flip Blade, uncut
fit for FCC ID: OHT01060512
Transponder chip / electronic: No
Tools: Pin Removal Tools and Needle File
5 Buttons: Lock, Unlock, Trunk release, Panic alarm
Blade: Flip Blade, uncut
This key case fits :
for 2010 - 2017 Buick Encore
for 2011 - 2016 Buick LaCrosse
for 2011 - 2017 Buick Regal
for 2012 - 2017 Buick Verano
for 2010 - 2016 Chevrolet Camaro
for 2011 - 2016 Chevrolet Cruze
for 2010 - 2016 Chevrolet Equinox
for 2014 - 2016 Chevrolet Impala
for 2013 - 2016 Chevrolet Malibu
for 2012 - 2016 Chevrolet Sonic
for 2010 - 2018 GMC Terrain
for 2011 - 2016 Buick LaCrosse
for 2011 - 2017 Buick Regal
for 2012 - 2017 Buick Verano
for 2010 - 2016 Chevrolet Camaro
for 2011 - 2016 Chevrolet Cruze
for 2010 - 2016 Chevrolet Equinox
for 2014 - 2016 Chevrolet Impala
for 2013 - 2016 Chevrolet Malibu
for 2012 - 2016 Chevrolet Sonic
for 2010 - 2018 GMC Terrain
(Please compare your key (key blade ,button pattern) with the picture before you buy.If you don't have the original key, please don't buy the Key. Please be informed that we do not hold any responsibility for damages caused by wrong installation or wrong purchase.)
Package Included:
1 x Flip Key Case Shell
1 x Set Tool (Pin Removal Tools and Needle File)
1 x Flip Key Case Shell
1 x Set Tool (Pin Removal Tools and Needle File)
Description:
*Aftermarket key case (not logo).
*The Pin Removal Tools and Needle File are included.
*A perfect replacement for a key with broken buttons or worn key blade.
*The circuit board and transponder chip can be installed from your original key into the new case.
*You can have the new key blade cut at your local locksmith's or you can transfer your original key blade to the new key case.
Please compare carefully before placing order, THE INNER AND OUTER STRUCTURE AS WELL AS THE BLADE
*Aftermarket key case (not logo).
*The Pin Removal Tools and Needle File are included.
*A perfect replacement for a key with broken buttons or worn key blade.
*The circuit board and transponder chip can be installed from your original key into the new case.
*You can have the new key blade cut at your local locksmith's or you can transfer your original key blade to the new key case.
Please compare carefully before placing order, THE INNER AND OUTER STRUCTURE AS WELL AS THE BLADE
On Mar 5, 2026 at 00:58:35 PST, seller added the following information: