Description

Our foam cutting machine injects new efficiency and convenience into your creative process, saving valuable time and energy dramatically. It reshapes the boundaries of creativity with precise temperature control and diverse adjustable designs. Simple operation allows ideas to be realized immediately. By choosing this product, you are embracing a more efficient, precise and innovative approach full of endless possibilities.

Key Features

Build to Last: It is made of high-quality multilayer board and stainless steel column, which is wear-resistant and rust-resistant, and can be used for a long time.

High Efficiency: It adopts electric heating wire cutting, and can heat the wire to the required temperature in about 0-5 seconds so that you can quickly and smoothly cut the foam and improve work efficiency.

Precision Cutting: The worktable is carefully designed with scales on all four sides to allow you to accurately measure each piece of material, and the 0.01" heating wire design allows for more accurate cutting and less error, as well as a lower rate of wastage.

Adjustable Design: You can adjust the desired temperature between 32℉ to 572℉ by turning the voltage adjustment knob of the adapter. The cutting height, width, and radius of the cutting circle can also be adjusted, allowing you to achieve precise cutting results.

Enjoy DIY: By adjusting the angle of the support, you can change the position of the wires and cut different shapes of materials, you can easily get cones, squares, cylinders, and other kinds of irregular shapes to fully enjoy the fun of DIY.

Simple Operation: This product has a simple operation method and a 15.35*12.99-inch workboard, which is suitable for both beginners and professionals to use easily.

Simple Installation: The product has a simple structure and complete accessories, allowing you to quickly assemble and start using it. Its small size(15.35*12.99 in) will not take up too much tabletop.

Easy to Clean: With its smooth and flat surface, this product is easy to clean. You can easily wipe off the dust with a damp rag.

Ideal Gift: Thanks to its powerful function and simple operation, you can give it as a gift to your friends who love DIY on their birthday, Christmas, or any other holiday.

Buy with Confidence: We stand behind all our guests and look forward to assisting you with your purchase. It is our pleasure to answer your confusion and questions. The end of the story between us is not "we sell and you buy".

Details

Rubber Foot Pads: They can be slightly adjusted to ensure stability while protecting the table from being scratched.

Guide Ruler: The stainless steel guide ruler can help you make straight cuts.          

LED Display: The adapter has an LED display that shows the voltage value in real-time for better control of the cutting process.

Wire Storage Wheel: The large wire storage wheel can store up to about 65.61ft of heating wire, so you can finish your cutting work without having to replenish the wire frequently.

Application

It can be used to cut foam, sponge, pearl cotton, ribbon, KT board, etc. It can cut angles, cylinders, sharp cones, rings, cones, straight lines, and other shapes.                                            

How to Install

• Take out the semicircular angle board, align two holes on the angle board with two holes on the worktable, and tighten them with screws.
• Take out the L-type stainless steel square pipe support, and align two holes on the pillar with two holes on the angle board. Put on the bolt, cover the copper nose (copper nose is conductive zero line, and very important), and tighten the nut.
•  Pull out the heating wire about 11.81in from the wire wheel.
• Thread the heating wire through the small hole of the worktable, and then make a ring on the heating wire and hang it on the spring at the machine's bottom. It should not fall off.
• Rotate the aluminum alloy wire wheel on the bracket to tighten the heating wire. The heating wire is moderately tight and naturally elastic.

Specification 

Material: Multilayer Board, Stainless Steel, Aluminum Alloy

Color: Light Blue, Silver

Mount Type: Countertop

Assembly Required: Yes

Plug Type: US Standard

Power Supply: Corded Electric

Adapter Input: 100-240V

Voltage: 18V    

Power: 72W

Preheating Time: 0-5 Seconds

Cutting Height: 0-25cm/0-9.84 in

Cutting Width: 0-28cm/0-11.02in

Cutting Diameter: 0-10cm/0-3.94in

Adjustable Bracket Angle Range: 0-180°

Power Cord Length: 222.5cm/87.6in

Heating Wire Diameter: 0.28mm/0.01in

Adjustable Temperature Range: 0~300℃/32~572℉

Workboard Size: 39*33cm/15.35*12.99in

Package Size: 44.5*11.5*39cm/17.52*4.53*15.35in

Gross Weight: 3.3kg/7.27 lbs

Net Weight: 3kg/6.61 lbs

Package Included

1* Foam Cutting Machine

1* Power Adapter

1* English Manual

Other Accessories for Assembly

Notes

• Please read the manual completely before installation and use.
• Please do not touch the heating wire of the cutting machine when the power is on. Please keep a certain distance from the heating wire. If necessary, wear gloves to avoid scalding. The heating wire should not be too red, otherwise, it is easy to break, and the life of the adapter will be affected.
• Please use the product in a ventilated environment. It is not advisable to allow small children to play with this machine.
• Please turn off the power when the product is not in use. Long-time idle burning may cause damage to the machine.
• Please note that it is not suitable for fireproofing materials. When cutting, the cutting wire temperature is high, and attention should be paid to keeping away from flammable and explosive products.
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.