Features:
1: The power supply adopts an isolated design, and the biggest advantage of the isolated power supply is high safety and reliability
2: Input reverse connection protection
3: stable performance
4: Output short circuit protection
5: Solder-free wire terminals, easy to use.
1: The power supply adopts an isolated design, and the biggest advantage of the isolated power supply is high safety and reliability
2: Input reverse connection protection
3: stable performance
4: Output short circuit protection
5: Solder-free wire terminals, easy to use.
The power supply adopts an isolated design, and the biggest advantage of the isolated power supply is high safety and reliability, because there is no direct current loop between the input and output. Even if the power supply is abnormal, the damage to the load is very small. For example, after the switch tube breaks down, the input voltage will not be added to the output end to cause damage to the load. At the same time, the power supply has MOS tube input anti-reverse connection protection, and the output has short-circuit protection. It is suitable for power supply of products that require relatively high power reliability.
The main parameters:
Power supply properties: Isolated step-down constant voltage switching power supply
Input voltage: DC12-90V
Output voltage: DC 9V 12V 19V 24V
Output current: 9V 12V 19V maximum 4A, continuous operation 3A. 24V max 3A, continuous 2.5A.
Output ripple: 100mv (measured at 12v2A)
Input anti-reverse: Yes (mos anti-reverse)
Output short-circuit protection: Yes (can not be short-circuited for a long time)
Conversion efficiency: About 88%, measured at 48 rpm at 12V 2A
Wiring method: Solderless wire terminal
Product size: length 88mm* width 53mm* height 22mm
Packing method: Anti-static bag packing
Power supply properties: Isolated step-down constant voltage switching power supply
Input voltage: DC12-90V
Output voltage: DC 9V 12V 19V 24V
Output current: 9V 12V 19V maximum 4A, continuous operation 3A. 24V max 3A, continuous 2.5A.
Output ripple: 100mv (measured at 12v2A)
Input anti-reverse: Yes (mos anti-reverse)
Output short-circuit protection: Yes (can not be short-circuited for a long time)
Conversion efficiency: About 88%, measured at 48 rpm at 12V 2A
Wiring method: Solderless wire terminal
Product size: length 88mm* width 53mm* height 22mm
Packing method: Anti-static bag packing
Note:
1. This product is a constant voltage power supply and cannot be used in products that require constant current, such as charging batteries or driving LED lights with constant current.
2. The power supply can be buck and regulated, and can also be boosted and regulated. For example, the output is 19 volts, and the input 12 volts-90 volts can be stable at 19V output. under boost conditions. The load capacity will be reduced by half.
2. The power supply can be buck and regulated, and can also be boosted and regulated. For example, the output is 19 volts, and the input 12 volts-90 volts can be stable at 19V output. under boost conditions. The load capacity will be reduced by half.
Packing list:
1PC DC-DC isolated step-down power supply module
1PC DC-DC isolated step-down power supply module
