Ohio Based Home Workshop Specialist |
Product DetailsAutobox flag ship product, the most eye-catching part of this mini lathe is its Exclusive Two-Axis, 4-Way Auto Feed design. It provides both longitudinal and cross auto feed in both directions (left/right, forward/backward). You can produce highly accurate and consistent parts, ensuring that each part meets the required specifications and has better finishing. Spare parts and technical support available national wide, all products are sent from our warehouse in Ohio Luxury Combo Offers: Metal change gears, 11pc lathe tools, live center, drill chuck, center drills and now you are read to cut. Features -- Exclusive Two-Axis, 4-Way Auto Feed design. 4-stage variable speed, high torque through all speeds, thread cutting master Full metal gears, hand wheels and levels Spindle speed digital readout 16-TPI reversible leadscrew Cuts LH and RH threads in both inch and metric Chip tray and backsplash guard Emergency stop Forward and reverse in all speeds Inch/metric dials Threading dial indicator Quick-locking tailstock Specifications -- Swing over bed: 8" Swing over cross slide: 4.3" (110mm) Distance between centers: 16" Spindle bore: 0.78" (20mm) Chuck bore: 2" Spindle nose taper: MT#3 Motor: 550W (3/4HP), 110V, single-phase Number of speeds: 4-stage, full variable Range of speeds: 0-330-660-1000-2000RPM Leadscrew: 16TPI Compound rest travel: 2" Cross slide travel: 2.5" Carriage travel: 11.6" (295mm) Maximum tool size: 3/8" (10mm) Tailstock quill travel: 2” Tailstock barrel taper: MT#2 Longitudinal feed speed: 0.1-0.2mm Number of inch threads: 18 Range of inch threads: 12-52TPI Number of metric threads: 9 Range of metric threads: 0.5-2.5mm Overall dimensions: 760x330x330mm Approximate shipping weight: 145lbs Inclusions -- 1 x Oil Tray 1 x 4" Three Jaw Chuck with revisable jaws 1 x User’s manual 1 x Tool Box Luxury package -- 1 x Metal change gear set 20T 25T 30T 35T 40T 40T 45T 45T 50T 50T 60T 60T 80T 80T 3 x Tool Holder 1 x Drill chuck 1 x Live center 7 x Lathe tools 5 x Center drills Engineering SpotlightIn addition to the 2-way auto feeder design, another major improvement of this lathe is the gearbox, by using new designed 4-stage driving system plus variable speed control, it increases torque at low speed significantly, which makes cutting thread on hard metals (cast iron, mild steel, e.g.) is possible. An extra Lead screw support bearing on its left end to avoid compression load thus reduces the vibration when engaging auto-feed or threading. Cam-locking tailstock with its control level relocated on top, so it won't affect winding the handle on compound slide when it's approaching the tailstock. It also features digital RPM display (spindle speed DRO) for dialing in the perfect cutting speed. Full metal gears and hand wheels for a long service lift span. This lathe includes all the essential standard equipment you'll need to get up and running including: a 4" 3-jaw chuck with internal and external jaws, 4-way turret tool post and MT#2 and MT#3 dead centers. Like all of the AUTOBOX lathes, it comes with a 1-year warranty covering parts and assuring the units free from factory defects. The manual was written by our U.S.-based Documentation Department is packed with useful information. The AUTOBOX Technical Support team are also U.S.-based. Parts for the lathe may be available online and shipped from the AUTOBOX warehouse in Ohio. Shipping Payment and WarrantyItems will be posted to your eBay address with in 24 hours. We accept PayPal, Bank Deposit or Pay over the Phone. (2% Surcharge) Normally we provide 1 year manufactures warranty (3 month for a commercial use product) for general products but not for models and consumable products. |
Ohio Based Home Workshop Specialist. Copyright (C) 2024 Autobox LLC All rights reserved. |