AEROFLOW Stainless Steel Brake Hard Line 3/16″ x 25ft

Aeroflow Performance 304 stainless steel hard lines are aircraft-quality, thin wall tube which are double annealed for easier flaring and bending. This stainless-steel brake/fuel/oil line is ideal for routing lines along the chassis, frame rails or anywhere flexible line is not required. These stainless-steel hard lines are rated for up to 6000 psi and designed for use with tube line adapter fittings or when using a flaring tool with tube nut/tube sleeve combinations.

Overview

• Description: Stainless Steel Brake Hard Line 3/16″ x 25ft
• SKU: AF66-3316
• Manufacturer: Aeroflow

The hard line is available in 25-foot rolls (7.6 meters) of 3/16″ (4.76mm), 1/4″ (6.35mm), 5/16″ (7.95mm), 3/8″ (9.52mm) or 1/2″ (12.7mm) outside diameter tubing.

Stainless steel tube manufactured to ASTM-A269 standards.

NOTE: Stainless steel is more difficult to bend and flare, compared to typical steel line. We recommend that a professional-grade flaring tool be used with these lines. Stainless steel can also be difficult to seal when replacing an existing brake or fuel line. The previously installed line can create a wear pattern on the flare seat which will not allow the new stainless-steel flare to seal properly. When replacing an existing line we recommend a thorough inspection of the existing brake fitting, fuel fitting, junction block, wheel cylinder, brake caliper, etc. It’s possible that the existing component may need to be replaced for a proper seal.

Since 2010, Aeroflow Performance Products has grown to design and manufacture close to 11,000 exceptional quality products. Fittings and hoses, fuel system components, air and oil filters, oil systems, silicone hoses, fabricated tanks, alternators, workshop tools and much more. As a company, they have tried to lead the way for the Performance enthusiast.