Description of the product:

Product features:

Motor model: JGY370

Power supply: DC 6V, 12V, 24V

Shaft diameter: 6mm

Speed: 2RPM - 375RPM

Speed error: 10

Motor size: specific size, as shown in the picture

All-metal gearbox, can be used with controller to control RPM.

(Controllable range 0-idle), motor can run forward and reverse (replace the positive and negative poles of the motor).

The JGY370 turbine worm gear motor has an electrical self-locking function. Low noise zinc alloy die-casting housing

Low noise zinc alloy die-casting housing, hardened stainless steel output shaft. The maximum load capacity of the gearbox is about 30kg, and the normal service life of the JGY370 turbo worm gear motor is about 5 years.

The normal service life of JGY370 gear motor is 1000 hours of continuous operation.

How to use the motor and how it works:

1. Use tolerance: Pay attention to the application range of voltage and current, and use the motor under the conditions specified in this standard, otherwise the service life of the motor will be shortened.

2. Motor handling: Handle the motor with care and try to use the motor body as much as possible to avoid damage.

3. Motor wiring: Connect the red wire to the positive pole and the black wire to the negative pole.

Negative pole. Connect when the motor is rotating in the opposite direction.

4. Overload: Try to use the motor within the load range specified by our company. It is strictly prohibited to operate the motor with the rotor locked or near the motor for a long time.

*** It is strictly prohibited to operate the motor with the rotor locked for a long time, otherwise the motor will burn out.

5. Motor storage: storage temperature: 0℃-40℃, storage humidity: 15%-90% RH, avoid storage in high temperature, high humidity and corrosive gas.

6. Turbine worm gear deceleration, all-metal gear box, can be used with speed controller to control the speed (controllable range of 0-selected idle speed) ℃.

Product packaging: 1x Motor (optional)