Used For

· Heat treatment for metal parts.
· Weld the hinge of spectacles rim.
· Seal the injection glass bottle, conforming to GMP industrial standards.
· Fuse the lead or tin alloy plate for storage battery.
· Cut and fuse quartz or fine parts etc.
· Peel off FPC of computer, fuse LED chip and thermocouple.
· Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc.
· Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny.

Key Features

Simple raw materials——Using water (distilled water and pure water) as fuel, easy to obtain and energy saving. Safety guarantee——Low working voltage, designed to automatically cut off when exceeding the set voltage. Exquisite craftsmanship——This product adopts a series parallel composite process for electrolysis. Environmental protection and energy conservation——This design makes the machine safer, economical, environmentally friendly, and convenient to obtain fuel.



Model: H160A
Material: Iron, Stainless Steel, PVC
Treatment: Paint Spraying
Product Type: Polishing Machine
Features:
Fuel: Water (Distilled Water and Pure Water)
Power Source: Corded Electric
Appicable Acrylic Plates Thickness: ＜5mm/0.2inch
Voltage: AC 220V
Gas Pressure: 0.08-0.13Mpa
Environment Temperature: -10-40°C/14-104°F
Flame Temperature: ≥ 2800℃/5072°F
Capacity: 1.6L/54.1Oz
Max. Gas Output: 75L/H, 2536Oz/H
Water Consumption: 0.015L/H, 0.5Oz/H
Water Volume: 1000ml/33.8Oz
Solution Density: 15%
Power Cord Length: 1.5m
Hose Length: 1.5m
Product Size: 45*28*36cm
Net Weight: 6.4kg


Package includes

1 x Machine 1 x Flame Gun 1 x Plastic funnel 1 x Rubber Tube 1 x Power cable


How to Operate

1.Prepare 800 to 1000 ml of purified water. 2.Add the electrolytic powder(200-250g)into the purified water and stir it evenly (avoid skin contact with the electrolytic powder which is corrosive). 3.Add about one-third of the purified water to the pressure tank. 4.Connect the gas pipe to ignite and complete the installation.


Notes
1.Please note that this product does not include the electrolytic material.
2.Beware of electrical safety hazards. When using such tools, please take necessary personal protective measures and keep the product out of reach of children.
3.Please note that any accumulation of water in the hose will cause the flame to turn yellow, and should be discharged promptly.
4.Please take care to check the hose connections for air leaks.
5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.