Features:
1. High Carbon Steel Striker: Our Striker Has Been Designed To Produce Lots Of Sparks With Minimal Striking, Making This A Dependable Tool When Outdoors
2. A Fundamental Tool In Every Outdoor Enthusiast' S Fire Lighting Kit, They Are Reliable, Long-Lasting And Waterproof
3. Our Fire Steel Produces Sparks Reaching High Temperatures To Ignite Tinder. It Also Has Up To 15,000 Strikes. Imagine How Many Matches You Would Need To Light 15,000 Fires
4. A Great Kit For The Outdoorsman In Your Life. Perfect For Those Looking To Master More Traditional Fire Lighting Skills
Specifications:
Type: Flint Stone Fire Starting Kit
Condition: 100% New
Material: Carbon Steel
Using Flint Stone Fire Starting Kit Tips:
1. Place A Small Piece Of Char Cloth On The Top Of The Flint. The Goal Is To Shave Off A Very Small Strip Of Metal That Will Burn And Land On The Char Cloth. Striking Down At About A 30-Degree Angle Should Create A Spark Or Two, Which Will Cause The Cloth To Glow Red Where They Land. This Often Happens On The Edge Of The Cloth And Is Hard To See In Bright Sunlight. If A Spark Lands On The Char Cloth, Wait And Blow Gently On It Until You See Either A Glowing Crescent Or Nothing. If Nothing, Go Back To Striking.
2. Gather Firewood, Kindling, And Tinder. Char Cloth Won' T Burn Hot Enough To Light A Log All By Itself. Just Like Any Fire, You'Ll Need Tinder (Dry Grass, Bark Shavings, Newspaper), Kindling (Twigs And Small Branches), And Of Course The Logs Themselves. Char Cloth Makes It Easy To Start This Chain And Light The Tinder.
3. Spread The Flame. Blow On The Glowing Char Cloth To Get The Heat To Spread Across It. Pick Up The Tinder Bundle And Gently Push The Sides Up And Over The Cloth, Until They Start Burning.
Note:
There Is No Char Cloth Inside The Set, And Users Need To Burn It Themselves (They Can Use The Iron Box And Cotton Cloth Inside The Set To Make It).
Char Cloth Production Process:
1. Drill A Hole With A Diameter Of About 3mm In The Center Of The Lid Of The Iron Box, Fold The Cotton Cloth Once And Put It Into The Iron Box;
2. Place The Iron Box On The Fire And Bake For 3-5 Minutes. The Heat Should Not Be Too High, And Wait For The White Smoke Coming Out Of The Hole To Become Light And Dense Before Removing The Iron Box. After The Iron Box Cools Down, Open The Lid And Take Out The Char Cloth
Packaging Includes:
1* Flint Striker
1* Flint
1* Cotton Cloth
1* Fire Blow Pipe
1* Jute Pack
1* Iron Box
1. High Carbon Steel Striker: Our Striker Has Been Designed To Produce Lots Of Sparks With Minimal Striking, Making This A Dependable Tool When Outdoors
2. A Fundamental Tool In Every Outdoor Enthusiast' S Fire Lighting Kit, They Are Reliable, Long-Lasting And Waterproof
3. Our Fire Steel Produces Sparks Reaching High Temperatures To Ignite Tinder. It Also Has Up To 15,000 Strikes. Imagine How Many Matches You Would Need To Light 15,000 Fires
4. A Great Kit For The Outdoorsman In Your Life. Perfect For Those Looking To Master More Traditional Fire Lighting Skills
Specifications:
Type: Flint Stone Fire Starting Kit
Condition: 100% New
Material: Carbon Steel
Using Flint Stone Fire Starting Kit Tips:
1. Place A Small Piece Of Char Cloth On The Top Of The Flint. The Goal Is To Shave Off A Very Small Strip Of Metal That Will Burn And Land On The Char Cloth. Striking Down At About A 30-Degree Angle Should Create A Spark Or Two, Which Will Cause The Cloth To Glow Red Where They Land. This Often Happens On The Edge Of The Cloth And Is Hard To See In Bright Sunlight. If A Spark Lands On The Char Cloth, Wait And Blow Gently On It Until You See Either A Glowing Crescent Or Nothing. If Nothing, Go Back To Striking.
2. Gather Firewood, Kindling, And Tinder. Char Cloth Won' T Burn Hot Enough To Light A Log All By Itself. Just Like Any Fire, You'Ll Need Tinder (Dry Grass, Bark Shavings, Newspaper), Kindling (Twigs And Small Branches), And Of Course The Logs Themselves. Char Cloth Makes It Easy To Start This Chain And Light The Tinder.
3. Spread The Flame. Blow On The Glowing Char Cloth To Get The Heat To Spread Across It. Pick Up The Tinder Bundle And Gently Push The Sides Up And Over The Cloth, Until They Start Burning.
Note:
There Is No Char Cloth Inside The Set, And Users Need To Burn It Themselves (They Can Use The Iron Box And Cotton Cloth Inside The Set To Make It).
Char Cloth Production Process:
1. Drill A Hole With A Diameter Of About 3mm In The Center Of The Lid Of The Iron Box, Fold The Cotton Cloth Once And Put It Into The Iron Box;
2. Place The Iron Box On The Fire And Bake For 3-5 Minutes. The Heat Should Not Be Too High, And Wait For The White Smoke Coming Out Of The Hole To Become Light And Dense Before Removing The Iron Box. After The Iron Box Cools Down, Open The Lid And Take Out The Char Cloth
Packaging Includes:
1* Flint Striker
1* Flint
1* Cotton Cloth
1* Fire Blow Pipe
1* Jute Pack
1* Iron Box
