Gutta Cutter
Descriptions:NEW Dental A-BLADE Ⅱ Gutta Percha /Tooth gum Cutter with 4 tips
Feature：
1. Design ingenious , Shape beautiful , Conform to the human body engineering
2. Wireless mode , Operation ,flexible, convenient
3. Rapid heating , highest temperature of 260º C
4. High-capacity can be charged Nickel cadmium battery, charging time 3 hours
5. Fever needle can be sterilized by high temperature and high pressure , repeated use.
Technical Paraments:
1. Charger voltage: AC110V or 220V 50/60HZ
2. Battery: 1.2V 2400mAh
3. Power2.5W
4. Weight: about 305g
1. Design ingenious , Shape beautiful , Conform to the human body engineering
2. Wireless mode , Operation ,flexible, convenient
3. Rapid heating , highest temperature of 260º C
4. High-capacity can be charged Nickel cadmium battery, charging time 3 hours
5. Fever needle can be sterilized by high temperature and high pressure , repeated use.
Technical Paraments:
1. Charger voltage: AC110V or 220V 50/60HZ
2. Battery: 1.2V 2400mAh
3. Power2.5W
4. Weight: about 305g
Packing List:
1x main unit
4x tips
1x Box
1x English manual
1x main unit
4x tips
1x Box
1x English manual
Charging：
1.First,charge the instrument by connecting the charging station to a mains power socket
2. Plug the handipece into the socket in the charging station . While the instrument is charging,the LED lights up on the handpiece.
Use:
1.First,charge the instrument by connecting the charging station to a mains power socket
2. Plug the handipece into the socket in the charging station . While the instrument is charging,the LED lights up on the handpiece.
Use:
Fit a cutting tip onto the handpiece.Make sure that the angle of the tip is pointing in the opposite direction to the operating button,This makes work easier.
Important:
Important:
Never bend the tip while it is still in the handpiece.
1.Insert the cutting tip into the cavity while it is cold (without pressing the operating button).The gutta-percha point to be cut off must be encircled by the loop of the cutting tip.
2. As soon as the cutting tip is located directly on the canal access,press the operating button.
1.Insert the cutting tip into the cavity while it is cold (without pressing the operating button).The gutta-percha point to be cut off must be encircled by the loop of the cutting tip.
2. As soon as the cutting tip is located directly on the canal access,press the operating button.
3.The tip heats up in seconds and the gutta-percha point can be quickly and cleanly removed.
4.After the point has been cut off ,release the operating button. The cutting tip immediately cools down and can be removed from the patient＇s mouth .The operating button is a “contact button” which only switches the button is released,the instrument switches off.
5.Remove the cutting tip from the handpiece after use.
Attention:Please don＇t continue to press the button more than 30 seconds.
4.After the point has been cut off ,release the operating button. The cutting tip immediately cools down and can be removed from the patient＇s mouth .The operating button is a “contact button” which only switches the button is released,the instrument switches off.
5.Remove the cutting tip from the handpiece after use.
Attention:Please don＇t continue to press the button more than 30 seconds.
---------------------------------------------------------
Buchanan Hand Pluggers:
Buchanan Hand Pluggers Featuring both a tapered nickel-titanium end and a stainless steel end, Buchanan Hand Pluggers can be used in any common obturation technique, including warm and cold condensation. The pluggers are also ideal for backfilling canals. Use the NiTi end for finishing off condensation procedures in even the most radically curved canals. Either end may condense and control the movement of gutta percha under pressure. In addition, the Buchanan Hand Pluggers are fabricated of the highest grade materials for excellent durability and sterilization.
Part Numbers:
Number Description
974-0058 Buchanan Hand Plugger Size #1 Stainless tip size .02/80 NiTi Tip Size.03/.40 Red Tip
974-0059 Buchanan Hand Plugger Size #2 Stainless tip size .02/.1.3 NiTi Tip Size.03/.70 Blue Tip
974-0060 Buchanan Hand Plugger Size #0 Stainless tip size .02/.75 NiTi Tip Size .03/.25 Yellow Tip
Buchanan Hand Pluggers Featuring both a tapered nickel-titanium end and a stainless steel end, Buchanan Hand Pluggers can be used in any common obturation technique, including warm and cold condensation. The pluggers are also ideal for backfilling canals. Use the NiTi end for finishing off condensation procedures in even the most radically curved canals. Either end may condense and control the movement of gutta percha under pressure. In addition, the Buchanan Hand Pluggers are fabricated of the highest grade materials for excellent durability and sterilization.
Part Numbers:
Number Description
974-0058 Buchanan Hand Plugger Size #1 Stainless tip size .02/80 NiTi Tip Size.03/.40 Red Tip
974-0059 Buchanan Hand Plugger Size #2 Stainless tip size .02/.1.3 NiTi Tip Size.03/.70 Blue Tip
974-0060 Buchanan Hand Plugger Size #0 Stainless tip size .02/.75 NiTi Tip Size .03/.25 Yellow Tip
Type | Niti End | Stainless Steel end | ||
Size | Taper | Size | Taper | |
#0 | 0.25mm | 03 | 0.75mm | 02 |
#1 | 0.4mm | 03 | 0.8mm | 02 |
#2 | 0.7mm | 03 | 1.3mm | 02 |
------------------------
4 Colorful Dental Endodontic Hand Plugger
Material: Aluminium Alloy+Stainless Steel+Nickel-titanium Alloys
Specification:
1.Clearly identify the model and specifications.
2.Flexible NITI tip for narrow and curved root canals.
3.Four specifications to choose from.
On Nov 9, 2025 at 18:52:45 PST, seller added the following information:
On Jan 23, 2026 at 15:01:10 PST, seller added the following information: