Package Content :5Pcs 4pin led connectors and 1 bundle 32.8ft(10M) 4pin extension wire

Connectors Specification:

Rated Voltage: 0-36V

Rated Current: 0-5A

Interface type: 4pin

Working PCB Width: 10mm

Working Environment Temperature: -10~45℃

Extension Wire Specification:

Interface Type:4 pin

External Material : PVC plastic

Interal Material: copper

Rated Temperature：80℃

Rated Voltage:0-300V

Rated Current:0-2A

Installation Tips:

1. Cut the strips and wires to the length you need, and then fully open the clamp.

2. Push the strap in until it touches the backing, let the pins touch the connector, and then press down firmly to make sure the pins pierce the strap. (You can use tools such as pliers)

3. Push the wire into the wire end of the connector, and then press it down firmly to ensure that the pin pierces the wire sheath. (You can use pliers and other tools)

4. Reminder: 1. Please make sure that the contact point of the light strip is in contact with the copper sheet of the buckle; 2. When connecting the light strip, there is no need to peel off the adhesive on the back of the light strip

What you get: 5 pieces of 4pin 10mm led light strip connectors (strip to strip and strip to wire included), 1 bundle of 32.8ft 22awg 4 pin led strip light extension cable.
Specifications: [rgb extension cable 4 pin 22awg] rated voltage: 0-300V, rated current: 0-2A; [4pin 10mm LED connectors] rated voltage: 0-36V; rated current: 0-5A ！Please check whether the size of this product meets your requirements.
Easy to use: The upgraded crystal 4 Pin LED light strip connector is convenient and easy to hide, good light transmission, the light will not be blocked or interrupted. The high-quality transparent PC material makes your DIY LED strip more beautiful and durable.
It's up to you: These RGB connectors are suitable for 4PIN 10mm wide waterproof or non-waterproof LED RGB strip lights, When your light bar is a little distance from the power supply, these led extension cable will be perfect for connecting or extending LED RGB strips or other DIY projects.
Stable work: the sharp copper thorn design can directly and clearly align and stably contact the contacts of the led strip without soldering or stripping the sheath.