4pcs 20mm 5x4.5 Hubcentric Wheel Spacers M12x1.5 For 2012-2018 Toyota Prius V

wheel spacers  Wheel Spacers  Wheel Spacers Specification：


Wheel bolt pattern: 5x4.5" / 5x114.3 mm  

Vehicle bolt pattern：5x4.5" / 5x114.3 mm  

Thread Size：12x1.5                                          

Spacer Thickness: 20mm

Color：Black       

                                            

Package include:

4 Pcs wheel spacers

1pair  Protective Gloves

1PCS Cleaning Wire Balls

 

[Important Notes]

 

1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.

2. Measure the fender gap and stock bolt length to choose suitable thickness.

3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.

4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.

5. Returns are only accepted if unused and not  installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)

-- Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.


-- For 1 inch or less or special adapters,

If your vehicle requires 2" spacers but you purchased ≤1" , the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.


-- For 2 inches or more or special adapters,

If your vehicle requires 1" spacers but you purchased ≥2", the stock studs are shorter to hold the spacer safely, you need to exchange to small size adapters or purchase longer studs yourself.

 

What should I pay attention to during installation?

 

1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.

2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.

3) DO NOT proceed if both of the wheel spacer do not fit.

4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.

5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).

6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
7)All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.

8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.  


Fitment：

Lexus:
1992-2003 Lexus ES300
2013-2020 Lexus ES300h
2004-2006 Lexus ES330
2007-2020 Lexus ES350
2016-2017 Lexus GS200t
1993-2019 Lexus GS300
2007-2011&2013-2020 Lexus GS350
1998-2000 Lexus GS400
2001-2006 Lexus GS430
2008-2011&2013-2018 Lexus GS450h
2008-2011 Lexus GS460
2010-2012 Lexus HS250h
2016-2017 Lexus IS200t
2006-2015 Lexus IS250
2001-2020 Lexus IS300
2006-2020 Lexus IS350
1990-2000 Lexus LS400
2001-2006 Lexus LS430
2015-2017 Lexus NX200t
2018-2020 Lexus NX300
2015-2018 Lexus NX300h
2016-2017 Lexus RC200t
2016-2020 Lexus RC300
2015-2020 Lexus RC350
1999-2003 Lexus RX300
2004-2006 Lexus RX330
2007-2020 Lexus RX350
2018-2020 Lexus RX350L
2006-2008 Lexus RX400h
2010-2020 Lexus RX450h
2018-2020 Lexus RX450hL
1992-2000 Lexus SC300
1992-2000 Lexus SC400
2002-2010 Lexus SC430

Scion:
2005-2016 Scion tC
2008-2015 Scion xB

Toyota:
1995-2020 Toyota Avalon
1996-2020 Toyota Camry
2018-2020 Toyota C-HR
2001-2020 Toyota Highlander
1991-1995 Toyota MR2
2012-2018 Toyota Prius V
1996-2020 Toyota RAV4
1998-2020 Toyota Sienna
1999-2008 Toyota Solara
1986-1998 Toyota Supra
2009-2016 Toyota Venza
2005-2015 Toyota Tacoma (Only fit 2WD/X-Runner)

 

Benefits: 

1.  Improve Vehicle Stability:

2.  Wheel spacers widen your vehicle wheel base, increasing stability, aggressive stance is a free bonus            

3.  Increase Clearence:

4.  Wheel spacers increase tire to frame clearence to allow installation of lift/lowring kits and wider/larger, high traction tires.

5.  Hardened CR-Steel Studs:

6.  Forged, heat-treated and hardened ISO/DIN 10.9 (SAE Grade 8) wheel bolts deliver strength and corrosion resistance.

 

 

1.We only accept PayPal. PayPal is the only online payment method we accept. Please make sure you have a valid/confirmed PayPal account prior bidding.

2.All Paypal Payments must be Confirmed. Payment must be made within 48hrs of the auction end time. Non-Paying bidders will be reported.

3.When you get your package,maybe you will pay some charges, it's taxes for local customs,not pay to us, and the fees are depends on the customs, all buyer are same.

1.Items will be shipped within 2 business days after payment is received.

2.We ship to your eBay address. Please make sure your eBay address is correct. Buyer takes responsibility if eBay address is wrong.

3.Import duties, taxes and charges are not included in the item price or shipping charges. Please check with your country customs office for these additional charges.

4.We shipping using UPS or USPS from our nearest warehouse to you. Tracking numbers will be emailed upon shipment.

1.Please feel free to email us if you have any question.

2.We appreciate you contact us via eBay message when you are not satisfied rather than open case or leave negative feedback directly. We'll try our best to solve the issue.

3.Refund will be issued once we receive your returned items. Buyer is responsible for all return shipping charges.

4.Please contact us for return process before you return the item.

5.All items for exchange or refund must be returned in "as new" condition.

We are the responsible seller ,always provide high-quality products and best service .If you have any questions, please contact us, and will try our best to help you. Please contact us by eBay Message, and we will reply you within 24 hours. Thank you very much!
We are the professional auto parts manufacturer , and provide line lock, AN hose end fittings , fuel line , fuel filter , fuel regulator , exhaust cutout , exhaust tips , exhaust muffler and so on .The quality of the product to be secured. If you have any questions or any needs , please contact us , and will try our best to help you.
BrandTEMBOR
ColorBlack
Manufacturer Part NumberDose not apply
MaterialT6 6061 Billet Aluminum Alloy
TypeWheel Spacers
Superseded Part Number5x4.5" Wheel Spacers 12x1.5 60.1
Thickness20mm
Vehicle Bolt Pattern5x114.3mm or 5x4.5"
Wheel Bolt Pattern5x114.3mm or 5x4.5"
HubcentricYes
Thread PitchM12x1.5
Stud Grade10.9 Class Stud 35Grmo
Hub Centre Bore60.1mm
PushAuction