Name:Thread Tap Straight Hand Tap
Material:HSS Steel
Specification M2 M2.5 M3 M4 M5 - M30
Color:silver
Size
M16 x 2 （2PCS）
M3 x 0.5 （2PCS）
M2.5 x 0.45 （2PCS）
M4 x 0.7 （2PCS）
M10 x 1.5 （2PCS）
M12 x 1.75 （2PCS）
M18 x 2.5 （2PCS）
M14 x 2 （2PCS）
M8 x 1.25 （2PCS）
M30 x 3.5 （2PCS）
M27 x 3 （2PCS）
M5 x 0.8 （2PCS）
M6 x 1 （2PCS）
M20 x 2.5 （2PCS）
M24 x 3 （2PCS）
M2 x 0.4 （2PCS）
M22 x 2.5 （2PCS）
● Features :
1、High-speed steel hand taps, hardness can be maintained at 60HRC or more, professional - sharp - no burr - accurate
2、Head cutting edge, high strength, suitable for all kinds of cutting products.
3、Excellent quality/excellent workmanship, fully ground straight groove coarse thread taps, detailed screw threads using alloy tool steel, has a high cost-effective and applicability
4、shank drawing design, alloy tool steel, shank with a drawing design, so that the clamping is more stable tapping more labor-saving.
Products need to know!
When tapping, first insert the head tap so that the tap centerline and the drilling centerline.
Both hands evenly rotate and slightly pressure to make the tap into the knife, into the knife without having to add pressure.
Every time you turn the tap to reverse about 45 degrees to isolate the cutting, so as not to block.
If the tap is difficult to rotate, do not increase the rotating force, otherwise the tap will break.
Widely used in the processing of metal materials, hard plastics, wood and other materials, its process performance, strength and toughness are very good, so it is mainly used in the manufacture of complex thin edge and impact-resistant metal cutting tools.
The size is measured by hand, please allow for minor measurement errors. Due to the color display effect of different monitors, the photo color may be slightly different from the real thing.
● Warm Tips:
Package Include: According to your choice.
