Why need a channel with diffuser ?

1.Protect the exposed strip from Dust,Moisture and inadvertent touch,extend the lifespan of the strip
2. Provide a New Professional Clean finish to the exposed fixtures,Take your LED strips to the next level
3. Breake up the harshness dots from the led strip without making light too dim, evening out the lights to a fairly smooth glow for background illuminating or on Counter.

For Diffusion Effect
When it comes to that spotty/dotty LED effect, people often think a diffuser will solve this outright. Buy that is not true ,Diffusion Effect depends on 2 things:
1. The number of LEDs per m
2. The depth of the profile
Hence when using LED tapes such as those which only have 30 LEDs per me, no amount of diffuser is going to make the like look seamless. If this effect is desired, we recommend 120-240 LED per m for a seamless constant glow, in combination if any of our profiles over 12mm deep.

Steps for a DIY Lighting Project
1.Measure the width of the strip ( make sure it is not oversized in the channel ) and test it
2.Trim the channel and cover to a required length by hacksaw or other devices if needed .
3. Confirm the way of installation such as Drill hole on channel ,By clips or Double sided tape, flush channel end to end for extension
4.Peel off the sticky at the back of the strip ,lay the strip in the channel
5.Snap the cover into the rail from One side to another ,Cable in the end caps Hole and seal the caps if needed
6.Wiring
The assembling and be done on the working Surface or away from it
High Standard 6063 Anodized Aluminum Track In Matte Black Color , 7MM High , 3 Clips per 3.3FT for Tight Fit ,Easy Installation, Clean Outlook and Flush Pre Cut End

Translucent Diffuser does not only protect the exposed strip from dust and moisture but also evening and smooth out the lights well with 90% Transmittance rate and without color Shift .The cover is protected by removable film initially

The channel can be trimmed to required length easily by hacksaw or grinder,the cover can be cut by utility knives and scissors, 45 degree Mitre is supposed for the corner,19MM Long Clips can Also be Used as Joiner

The Aluminum Track is designed to hold the strip less than 12.4mm(0.49’’) wide ,it fit for Vast majority of 5050 5630 2835 steady color ,RGB ,RGBW and programmable tape(not for hue 2nd)

The package included Aluminum channel 3.28FTX10,Milky PC Cover 3.28FTX10 ,304 Countersunk screwX30 .Stainless steel Mounting Clips X30 ,End caps With Hole X20