Upgrade your pinball machine with the Bally / Stern Power Driver Board. 

This high-quality board is designed to work with Bally and Stern pinball machines, 

that have the modern LED displays fitted. (No High Voltage)

These Power Driver boards were developed late 2023, 

as the original boards had a few design flaws with older obsolete components,

my boards have been up-dated with modern SMD components but still use through hole transistors, 

a lot of research / development was done i improve on the original design, 

i have used a TO-3 type switching 5 volt regulator, for ease of replacement if the need should ever arise. 

 Back in 2023 i had only manufactured a small batch run for full testing in the machines at the arcade i work at, 

now having many requests for a power driver board, i have put these into full production ..

OEM style diodes to protect the IC's from surge currents 

3 LED's to show +5v (red) , 11.9v (yellow) & 48v (blue)

Heavy duty Relay with green LED to show activated

Modern components having a higher rating

Original style lay out for troubleshooting

Through hole components for service

Test points to check all voltages

No custom chips !

Bally # AS2518-16 & AS2518-22

Stern # SDU100

Please Note :- Does NOT have High voltage section on these boards as they are designed to suit LED displays.

Between work in an arcade and small batch runs of these boards for other arcade repair shops, 

it is only now i have time to produce and sell my own line of products..

These are Designed , Engineered and Assembled by hand here in Adelaide, to keep jobs in Australia.

If you have any questions please message..