For SEGA GG 3.5" Laminated LCD IPS Screen 640x480 HD Retro Pixel Kit For For SEGA Game Gear For SEGA GG Console W/Housing Shell

 

 

MAX display size IPS LCD. The display size is 16% larger than the original screen.

It also can set to the original display size.

 

Installation is easy; only need to remove one original screen, two fuses and replace one resistor.

 

 

Note: This LCD kit compatible with GG, SMS and SG-1000 games.

Note: The glass lens has the LOGO.

Note: Doesn't include the motherboard

​ ​

 

You need to cut the shell case to put in the IPS LCD. Pleasse contact me after you receive it. I will send the instruction manual to you.

Or,You can buy the customized shell case from this listing if you don't want to cut the sell case by yourself.

​ ​

 

1. Support Sega single chip motherboard and dual chip motherboard:

 

--Single chip motherboard:1 ASIC PCB revisions 837-9130 / 837-9024 / 837- 8560

 

--Dualchip motherboard:2 ASIC PCB revisions 837-7996 / 837-7719-01 VA0/837-7398-03

​

NOTE1: Doesn't supported: Majesco Game Gear VA4 / VA5

NOTE2: The motherboard with the "MADE IN TAIWAN" logo on the motherboard of the game console does not support.

​ ​

 

Description:

​

1. 640x480 display resolution. HD IPS LCD.

2. Pre Laminated Glass Screen.

3. The display size is 16% larger than the original screen. It also can set to the original display size

4. Wide View angle up to 178 degree.

5. Built-in OSD Menu!

6. High brightness, 15 brightness levels.

7. Retro pixel Effects: Normal, Retro pixel, Horizontal Scanline, Vertical Scanline.

8. Built in 3 LCD Aspect Ratio. Full Screen, Original Display sizey, Small size.

9. 8 color modes.

10. Image position adjustable. (It has no effect in full screen)

11. FPC connect cable design. Simpler wiring and easier installation.

​ ​ ​

 

OSD Menu Operation:

 

-Press the START+1+2 buttons for 1 second to activate the OSD Menu.

-Press the 'START' button to select the adjustment item when OSD Menu activated.

-Press the '1' or '2' button to adjust the item when OSD Menu activated.

​

 

Packing including :

 

 

1x Laminated Backlight LCD.

1x PCB Board.

1x FPC connect cables.

1x Double-sided tape.

Several Red wires.

 

 

Or,

1x Laminated Backlight LCD.

1x PCB Board.

1x FPC connect cables.

1x Double-sided tape.

Several Red wires.

1x Shell case, 1 set buttons, 1 set Rubber Pad, 1 set Sticker label,1 set screws.

PushAuction