Description :
100% New Style and Brand
Stainless steel valve assembly for the ultimate in corrosion control
The electric coil is fully enclosed in epoxy for reliability
The finned housing not only looks good but helps to dissipate heat
Wide, lightweight base for better mounting stability
Easily serviced in the field
Includes an extra threaded port for brake line pressure gauge
Specification:
Type: Brake Line Lock Kit
Model: Roll Control Hill Holder Kit
Voltage: 12~24VDC
Color Available:Silver, Black
Color: Silver
Material: Stainless Steel & Aluminum
Pad Material: Stainless Steel & Aluminum
Line Lock Finish: Silver Anodized
Line Lock Material: 6063 Aluminum, Stainless Steel
Line Lock Type: Electric
Inlet Attachment: Female Threads
Outlet Attachment: Female Threads
Inlet Thread Size: 1/8-27 NPT
Outlet Thread Size:1/8-27 NPT
Line Lock Outlet Quantity: Three
Line Lock Inlet Quantity: Only One
Mounting Style: Bolt-On
Solid or Vented Rotor: Solid
Rotor Style: Dimpled+Drilled+Slotted
Suitable for: Disc+Drum
Placement on Vehicle: Front
Caliper Finish: Anodized
Size: 15.6*18.7*7.7cm box
These evil energy line lock kits are used for drag racing to lock the front tires of the car. This decreases the chance of your car rolling through the lights before it's time. Also locking the front wheels produces a more efficient burn-out to heat up your tires. Extensive testing has shown a 10-millisecond release time with vibration resistance up to 30-G's with no mechanical failure. On the street or off-road, the evil energy line lock can also be used as a temporary electronic parking brake when both the clutch and brake are needed at the same time. Kits allow you to lock your front or rear brakes at will.
This launch control is a sophisticated device that installs into your existing brake system. The easily installed solenoid provides the brake holding capacity you are looking for. It can be used for racing or for street applications if you need a hill holder while stopped on an uphill grade. This high quality solenoid can be used on the front brakes of your vehicle. It can handle pressure spikes up to to 3000 PSI line pressure. Include light and switch.
Control to make the front and rear brakes synchronized. Hold the brake pressure to the front or rear brakes to hold the vehicle on a hill or the starting line at the drags. Easy to do a burn out by locking the front tires and releasing the back brakes with this system. Works with 12 - 24VDC electric systems.
Application Summary:
100% New Style and Brand
Stainless steel valve assembly for the ultimate in corrosion control
The electric coil is fully enclosed in epoxy for reliability
The finned housing not only looks good but helps to dissipate heat
Wide, lightweight base for better mounting stability
Easily serviced in the field
Includes an extra threaded port for brake line pressure gauge
Specification:
Type: Brake Line Lock Kit
Model: Roll Control Hill Holder Kit
Voltage: 12~24VDC
Color Available:Silver, Black
Color: Silver
Material: Stainless Steel & Aluminum
Pad Material: Stainless Steel & Aluminum
Line Lock Finish: Silver Anodized
Line Lock Material: 6063 Aluminum, Stainless Steel
Line Lock Type: Electric
Inlet Attachment: Female Threads
Outlet Attachment: Female Threads
Inlet Thread Size: 1/8-27 NPT
Outlet Thread Size:1/8-27 NPT
Line Lock Outlet Quantity: Three
Line Lock Inlet Quantity: Only One
Mounting Style: Bolt-On
Solid or Vented Rotor: Solid
Rotor Style: Dimpled+Drilled+Slotted
Suitable for: Disc+Drum
Placement on Vehicle: Front
Caliper Finish: Anodized
Size: 15.6*18.7*7.7cm box
These evil energy line lock kits are used for drag racing to lock the front tires of the car. This decreases the chance of your car rolling through the lights before it's time. Also locking the front wheels produces a more efficient burn-out to heat up your tires. Extensive testing has shown a 10-millisecond release time with vibration resistance up to 30-G's with no mechanical failure. On the street or off-road, the evil energy line lock can also be used as a temporary electronic parking brake when both the clutch and brake are needed at the same time. Kits allow you to lock your front or rear brakes at will.
This launch control is a sophisticated device that installs into your existing brake system. The easily installed solenoid provides the brake holding capacity you are looking for. It can be used for racing or for street applications if you need a hill holder while stopped on an uphill grade. This high quality solenoid can be used on the front brakes of your vehicle. It can handle pressure spikes up to to 3000 PSI line pressure. Include light and switch.
Control to make the front and rear brakes synchronized. Hold the brake pressure to the front or rear brakes to hold the vehicle on a hill or the starting line at the drags. Easy to do a burn out by locking the front tires and releasing the back brakes with this system. Works with 12 - 24VDC electric systems.
Application Summary:
Used in Drag racing to positively lock the front wheels, producing a more effective burnout.
The Roll Control Kit Includes:
Solenoid Valve Black Color
Snap-Action Switch
Indicator Light
Fuse (4 amps)
Mounting Screws
Brake Lines & Fittings
Notes:
(1) Should not be engaged for more than 60 seconds.
(2) This item is high quality aftermarket replacement but not original.
(3) Please kindly confirm the fitment before ordering to make sure this item is perfectly fit.
(4) Easy to install, but professional installation is recommended.
