Smart Delay Spot Welding
Intelligent delay spot welding features three programmable delay buttons for different requirements. Delays can be freely combined, with a maximum simultaneous delay of 1.5 seconds when all three buttons are activated. Power Adjustment for Secure Spot Welding
Used to regulate the machine's pulse welding power. Turn counterclockwise to decrease power, clockwise to increase power.
Used to adjust the machine's pulse welding power. Turn counterclockwise to decrease, clockwise to increase. For standard workpieces, position the regulator arrow at the center. Coordinated adjustment of the pulse power regulator with pulse current and pulse count enables reliable welding of nickel sheets ranging from 0.05 to 0.35mm. Adjustment method: First set the pulse current value and preset the pulse count to a double pulse (without enabling pulse trains initially). Then adjust the pulse power controller based on the required weld strength. To prevent excessive machine heating and triggering the protection mode, avoid exceeding 70% of the controller's rotation angle.
Spot Welding Parameters:
Power Supply Voltage: AC 220V/110V ±20V
Spot Welding Current: 120~1200A (Up-Push Welding Mode)
Quad Pulse Duration: 2~20ms
Fixed Head Spot Welding Range: 0.15~0.35mm
Main Unit Dimensions: 140 × 230 × 200 mm
Power: 4.3 kW (instantaneous peak)
Dual Pulse Duration: 1–10 ms
Eight Pulse Duration: 8–80 ms
Spot Welding Pen Range: 0.05–0.25 mm
Weight: 7 kg
Mobile Spot Welding Pen Parameters:
Welding needle pitch adjustable: 2~7mm
Pen cable cross-sectional area: 16mm²
Total length of mobile spot welding pen: ≈580mm
Welding needle dimensions: ②1.5mm × 7mm
