Description:

• The KVE520A breaks the size barrier for RF-analyzers by delivering user-friendly convenience, top-notch accuracy, and a vivid TFT multi-color display in an ultra-compact package.
• Use the Scan-Frequency Mode to graphically plot SWR, R, X, and Z. All four plots are captured as a sequence of sharply defined color graphs. Simply toggle through each screen for a complete visual analysis. There's also a tunable marker on each screen you can use to call up precise numerical values for SWR, R, X, and Z at any point along the plot.
• The KVE520A is continuously tunable from 133-177 195-280 395-520 MHz with 100-Hz resolution and a wide range of tuning steps and scan widths for shaping your plots.
• Best of all, you can forget about swapping out dead batteries, working around NiCd cell memory, or hunting for lost wall chargers because the KVE520A's long-running lithium-polymer power source is built right in. Simply connect to any available USB port on your computer or USB wall charger to recharge. A built-in smart-charger with LED status monitoring let's you know when the analyzer is ready to go.
• Once you're up and running, you'll quickly discover the KVE520A has many user-friendly features including soft-menu labeling for the command keys and a built-in 8-page Help Menu. Don't forget to personalize the KVE Antenna Analyzer Boot Screen by entering your call letters or name

Specifications:

1 Display: Sharp transflective TFT, 1600 million colors, QVGA resolution. External Hard Mitsubishi scratch-resistant acrylic lens protection

2 Measuring range:

                                VSWR: 1: 1.00-1: 99.99

                                Impedance: 0.1-999.9 Ohm

                                Resistance: 0.1-999.9 Ohm

                                Reactance: 0.1-999.9 Ohm

3 Frequency range: 133-177 / 195-280 / 395-520MHz

4 Frequency stability : <0.5PPM

5 The minimum frequency step: 1000Hz

6 Output Level: 3dbm (at 145/ 430MHz)

7 Sweep width: 300KHz / 1.5MHz / 3MHz / 6MHz / 12MHz / 24MHz / 42MHz / 75MHz (75MHz is only valid in 395-520MHz paragraph)

8 Scan step: 0.1/1/10/100/1000KHz

9 Power supply: 3.7V 1800mAH polymer lithium battery, removable design

10 Charge Power: Standard Micro USB connector (5.0-5.5V, 500mA)

11 Charge indicator:

      3 instructions state:

                                      1- charging (red)

                                      2- charging is completed (green)

                                      3- charging fault (flashing)

12 test interface: BNC

 

Packing List:

1x KVE520A Antenna Analyzer Meter

1x Removeable battery (inside host device)

4x RF Coaxial connector adapter

1x Dummy load

1x User manual (inside analyzer meter)