TPMS Relearn Tool, For Ford Fiesta Mk7 Mk7.5 2008-2017 Tyre Pressure Sensor
When you need this tire relearn tool?
1. New TPMS sensors installed, letting air out or adding air in to the tire couldn’t make the system recognize new sensors.
2. Do tire rotation, didn’t have a quick and easy way to let ECU relearn new tire information.
3. When tire pressure indicator light ON, after the maintenance performed, the tire pressure needs to be reset to turn off the TPMS light.
4. Low tire pressure or leakage /replacement or installation of tire pressure monitoring equipment / tire replacement, sensor damage, etc. After those problems solved, TPMS needs to be reset.
5. Exchanging the winter tires or Summer tires.
Applicable Models
2007-2022 F-150, Mustang, Edge; 2006-2022 Escape, Explorer;
2008-2022 F-250 F-350 F-450 F-550 Super Duty;
2008-2022 Expedition; 2008-2022 Flex;
2008-2022 E-150 E-250 E-350 E-450 Econoline Vans;
2008-2016 Fiesta; 2007-2022 Focus,Fusion;
2008-2022 Crown Victoria; 2011-2022 Transit Connect;
2008-2022 Taurus; 2014-2022 Transit;
2006-2022 Ranger; 2012-2022 C-Max;
2007-2022 Lincoln MKX, MKT; 2008-2022 Lincoln MKZ, MKS, Navigator;
2008-2011 Lincoln Town Car; 2007-2010 Lincoln Mark LT; 2015-2022 Lincoln MKC;
2006-2010 Mercury Mountaineer; 2006-2022 Monterey; 2006-2011 Mercury Mariner;
2007-2011 Mercury Mlian; 2006-2010 Mercury Grand Marquis; and more...
Tips for tpms tool:
- [1] Please make sure antenna fit in CORRECT position.
- [2] Do tire reset outside instead of in the garage.
- [3] Position of tires is also important, Front tires have to be straight
- [4] Sensors should be original OEM sensors which well programmed.
- [5] After testing a tire, turn device off & press the launch button again to activate the next one.
How to set vehicle in TPMS re-learn mode?
1. Make the gear in P position.
2. Ignition switch to OFF, press and release the brake pedal.
3. Turn ignition switch from OFF position to RUN position 3 times and end at RUN position.
4. Depress and release the brake pedal.
5. Ignition to OFF position.
6. Ignition goes from OFF position to RUN position 3 times and ends at RUN position.
7. Horn will ring once and TPMS indicator flashes, then learning mode has been entered successfully. If equipped, the message center will display the front left (LF) tire.
How to use TPMS19 sensor tool?
1. Set the car in TPMS learning mode. (car horns twice)
2. Starting relearn process from left front tire, point antenna on correct position. Press & hold power button. Once the speaker chirped, move to the next tire.
3. Follow this order to rest TPMS sensors: Front left, front right, rear right, rear left.
4. After all sensors reset, the car horns twice means TPMS re-learn finished.
Q: Press button of this device, the indicator light of this device flick.However, I does not heard any response. TPMS relearn not successful.
A: Following our correct step operation. (See our product photo showing.) Enter car TPMS relearn mode first, and operation this device. It could not directly operation.
Install a set of tire sensors (marked 'Programmed' on shell) replace old ones. 90% of situation of our clients encounter this situation by this reason. Some new tire sensors,lack of TPMS information.