Details

Universal Window Crank Shaft Extension and Door Latch Shaft Extension.

Detail information :
 
1.How to install
   First , Remove stock door handle(s) and remove the armrest and door panel as required . Install crank shaft extension over existing shaft and tighten set screw(s) with a 1/8" hex head, allen wrench to 72-75 inch pounds (We recommend using Blue Lock-Tite on the set screw to prevent it from backing out )
   As a note : the set screw is made of  steel with at cone point for the best possible holding capacity. With proper torque the pointed end of the set screw(s) will bite to the steel shaft and ensure it won't loosen up over time  
   Next,  re-install the door panel and push door handle on to the  shaft extension. Check to ensure the clip is engaged into the groove on the shaft extension.
    This product will extend your door handle shaft by 5/8" (tolerence is 0 to + 1/16") depending on the length of your existing shaft. If you need another 1/8" to 1/4" don't bottom out the extension on the original shaft when installing the extension and or if you need a little less extension, you can grind down the existing shaft to about where the groove for the c-clip would go ... just be sure the set screw will properly engage the original shaft then install the extension.
 
2.Fitment:
     Fits most 1950-1990 General Motors Products (Chevy, GMC, Pontiac, Buick, Olds, GM and Chevy Trucks, Camaro, Corvette, Cadillac) and many other domestic cars and trucks  ( Jeep, Dodge, Chrysler cars and and even imports like Toyota, Mazda, Nissan, Honda, Subaru, Hyundai, Mitsubishi, ...) with at ~1/2" diameter splined shaft on the window regulator (GM Spec for shaft diameter is .41 to .46 depending on whether it is a window crank, door latch release, wing vent crank or door lock... Our product fits most of them), 16 spline shaft in which the window or door handle is attached to the shaft with a "C" clip as depicted in photo # 2 and #3 of  this offering.
 
3.Return:

  If you return the item and the reason is "Too Long" I will charge a 20% fee for processing. I find that people are not reading the details of the product and expect a 1/4" extension which is impossible to make and it's costing me a lot of money. I can't be more upfront about the length of the extension.
 
4.Warranty
     10 Years Warranty :  Tested, proven product. We conduct random VT and PT testing of our  weld process to ensure the  welds are  adequate. Additionally, we conducted destructive testing by inserting  a 24" steel pipe over the extension and attempted to break the welds... the result was, we twisted and destroyed the window regulator and the splined shaft remained attached to the tubing as designed. That is why we offer a LIFETIME warranty on our material and quality craftsmanship.
 
Any questions ,welcome to conatct with us !
 

• Please leave us a good rating after you have received the item and are happy with our transaction. If there are any issues, please contact me first before leaving a neutral, negative or 5 star rating. Customer Satisfaction is our top priority!! We promise we can make you happy if you give us a fair chance. Thanks and happy bidding!

• Anyway, if you have any troubles,please feel free to contact us.We're willing to do anything resonable to help you out.Please do not leave any negative or neutral feedback before letting us know. Thanks!

•  Items are usually shipped out within 24 hours during the business days after payment has been received. (except Saturday and Sunday).Delivery Time is about 4-7 business days to most of regions. We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.

• PayPal Preferred, Credit or debit card through PayPal.

•  All returned products (Replacements or Refund) need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through eBay's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.

• All of our brand new items come with a 30-60 Days money-back guarantee. We define the item as defective only if it doesn't function as described.

• It is the buyer's responsibility to understand the item description before bidding. We will replace the defective items, provided that they are in stock within the warranty period posted with the listing. We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.

• The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.

• We have developed long-term relationships with world-renowned suppliers to ensure our products meet the highest industry standards. Whether it's wheel Hub, drivetrain or brake components, we offer a wide range of product lines to suit a variety of makes and models.
Whether you are a garage, a car owner or a car enthusiast, we offer personalised advice based on your needs to ensure you choose the most appropriate parts.

Copyright©2023 One-topauto20

Details
Universal Window Crank Shaft Extension Fits Chevy Camaro Corvette Buick Pontiac
 

Universal Window Crank Shaft Extension and Door Latch Shaft Extension.

Detail information :
 
1.How to install
   First , Remove stock door handle(s) and remove the armrest and door panel as required . Install crank shaft extension over existing shaft and tighten set screw(s) with a 1/8" hex head, allen wrench to 72-75 inch pounds (We recommend using Blue Lock-Tite on the set screw to prevent it from backing out )
   As a note : the set screw is made of  steel with at cone point for the best possible holding capacity. With proper torque the pointed end of the set screw(s) will bite to the steel shaft and ensure it won't loosen up over time  
   Next,  re-install the door panel and push door handle on to the  shaft extension. Check to ensure the clip is engaged into the groove on the shaft extension.
    This product will extend your door handle shaft by 5/8" (tolerence is 0 to + 1/16") depending on the length of your existing shaft. If you need another 1/8" to 1/4" don't bottom out the extension on the original shaft when installing the extension and or if you need a little less extension, you can grind down the existing shaft to about where the groove for the c-clip would go ... just be sure the set screw will properly engage the original shaft then install the extension.
 
2.Fitment:
     Fits most 1950-1990 General Motors Products (Chevy, GMC, Pontiac, Buick, Olds, GM and Chevy Trucks, Camaro, Corvette, Cadillac) and many other domestic cars and trucks  ( Jeep, Dodge, Chrysler cars and and even imports like Toyota, Mazda, Nissan, Honda, Subaru, Hyundai, Mitsubishi, ...) with at ~1/2" diameter splined shaft on the window regulator (GM Spec for shaft diameter is .41 to .46 depending on whether it is a window crank, door latch release, wing vent crank or door lock... Our product fits most of them), 16 spline shaft in which the window or door handle is attached to the shaft with a "C" clip as depicted in photo # 2 and #3 of  this offering.
 
3.Return:

  If you return the item and the reason is "Too Long" I will charge a 20% fee for processing. I find that people are not reading the details of the product and expect a 1/4" extension which is impossible to make and it's costing me a lot of money. I can't be more upfront about the length of the extension.
 
4.Warranty
     10 Years Warranty :  Tested, proven product. We conduct random VT and PT testing of our  weld process to ensure the  welds are  adequate. Additionally, we conducted destructive testing by inserting  a 24" steel pipe over the extension and attempted to break the welds... the result was, we twisted and destroyed the window regulator and the splined shaft remained attached to the tubing as designed. That is why we offer a LIFETIME warranty on our material and quality craftsmanship.
 
Any questions ,welcome to conatct with us !
 



Please leave us a good rating after you have received the item and are happy with our transaction. If there are any issues, please contact me first before leaving a neutral, negative or 5 star rating. Customer Satisfaction is our top priority!! We promise we can make you happy if you give us a fair chance. Thanks and happy bidding!

• Anyway, if you have any troubles,please feel free to contact us.We're willing to do anything resonable to help you out.Please do not leave any negative or neutral feedback before letting us know. Thanks!

•  Items are usually shipped out within 24 hours during the business days after payment has been received. (except Saturday and Sunday).Delivery Time is about 4-7 business days to most of regions. We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.

We accept major credit/debit cards (Visa, MasterCard), PayPal, and other methods

•  All returned products (Replacements or Refund) need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through eBay's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.

All of our brand new items come with a 30-60 Days money-back guarantee. We define the item as defective only if it doesn't function as described.

• It is the buyer's responsibility to understand the item description before bidding. We will replace the defective items, provided that they are in stock within the warranty period posted with the listing. We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.

• The guarantee will be only for the cost of the item, we will not responsible for installation or other fees like labor expenses, towing expenses, additional repair expenses or other related expenses.

We have developed long-term relationships with world-renowned suppliers to ensure our products meet the highest industry standards. Whether it's brake components , drivetrain or wheel Hub, we offer a wide range of product lines to suit a variety of makes and models.

Whether you are a garage, a car owner or a car enthusiast, we offer personalised advice based on your needs to ensure you choose the most appropriate parts.
Datacaciques