Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR AUDIOSAVINGS

Package Includes:

• (1) Rockville DV8K6D1 Dual 8" 2800w K6 Car Audio Subwoofers Plexi Sub Enclosure Box
• (1) Rockville RD1000.1 1000w RMS @ 1 Ohm (4000w Peak) Mono Amplifier Car Audio Amp
• (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's

---

Description:

Introducing the Rockville DV8K6D1 Dual 8" Enclosure with K6 Subwoofers

We set out to create something truly exceptional—an enclosure that not only performs but elevates your car audio experience. Ordinary pre-fab enclosures weren't enough for our renowned K6 subs. Our team rose to the challenge and crafted what we believe is the most impressive enclosure in car audio.

This enclosure is built to last with robust materials and delivers outstanding sound quality, which is, of course, the priority. But it’s not just about sound—it’s a showstopper! The front panel features thick plexiglass with strategically placed LED lights that provide a unique aesthetic. Choose between white or blue illumination to match your style or vehicle’s interior.

After researching all the top brands, we can confidently say this enclosure stands above the rest.

Enclosure Features:

• Dual 8" Subwoofers: Loaded with 2 Rockville W8K6D4 V2 subs with a total power handling of 2800 watts peak, 700 watts RMS, and pre-wired to a 1-ohm final impedance.
• Strong Build: Crafted with ¾” MDF, black carpet, and 1” MDF for sub mounting.
• Show-Ready Design: Plexiglass front panel with selectable white or blue LED lighting for a professional show car look.
• Optimized Sound: Vented enclosure with precise tuning at 34 Hz for deep and clean bass.
• Reliable and Durable: Bonded, stapled, and braced construction with 10 gauge copper push terminals for solid connections.
• Dimensions (Inches): 11.14” H x 23.74” W x 9.17” (top depth) / 11.9” (bottom depth).

Subwoofer Features:

• 2" Voice Coils: Black aluminum formers wound with 100% USA-made OFC copper wire for durability and high power handling.
• Powerful Magnets: Double-stacked 70 oz magnets paired with a high BL magnetic motor gap for maximum efficiency.
• Durable Cone and Surround: Fiber-reinforced ultra-stiff black non-pressed paper cone with a thick foam surround for minimal distortion.
• Black Stitching Reinforcement: Enhances durability and extends subwoofer life.
• Vented Cooling System: Vented T-yoke enhances heat dissipation, ensuring long-term performance.
• Frequency Response: 44 Hz – 1.5 kHz; Sensitivity: 83.4 dB; XMAX: 15 mm (one-way).

This enclosure isn’t just a home for your subs—it’s a statement. With unmatched design, durability, and performance, it’s the ultimate upgrade for car audio enthusiasts.

---

All About Your RD1000.1:

How To Set Up Your RD1000.1:

Inputs, Outputs, And Controls On Your RD1000.1 Explained:

What's in the box:

• Amplifier
• Metal Bass Remote with Clip Indicator
• Owner's Manual
• Mounting Screws
• Warranty

What is special about the RD Series:

More watts per dollar!

We are delivering more true RMS watts per dollar spent then our competitors. Especially considering that this amp was properly engineered in the USA.

Compact!

The RD series by Rockville is a compact class “D” amp that will not take up a lot of your valuable trunk space.

Engineered in the USA

This amp delivers clean power to your subs. We benchmarked this against some of the top selling amps on the market and here are some differences making our amp better:

Our amp has some of the best efficiency numbers on the market which means our amp will not strain your battery as much as some less efficient ones.

Our bass boost is properly engineered to boost the 45Hz frequency. Many amps we benchmarked this against have a bass boost that boosts 80Hz which makes it counter-productive. We pay a lot of attention to detail during our engineering phase in order to deliver a top-notch product at a great price.

Metal Bass Remote with Clipping Indicator

We include a high quality metal bass remote with a clipping indicator that allows you to easily increase your bass to its max level before distortion in real time. (This changes from song to song depending on the crest factor of your song). Some of the competing amps do not even have a clipping indicator on the actual amp which can cause you to blow your subs.

Tiffany RCA cables

We use tiffany style RCA terminals which are known to be the most secure and reliable on the market.

This Amp Can Handle the Heat!

Our amp will not easily go into thermal protection. It dissipates heat efficiently. We tested it on an audio precision at 4 ohms with full power at 100 Hz for 45 minutes and the amp stayed cool and did not go into protect. Most amps on the market would go into protect in around 30 minutes if it’s a good quality amp.

This is a true class “D” design. Be careful with half-bridge designs. They are cheap to produce, but the sound quality, longevity, and safety of them are questionable.

Features:

• Rockville RD1000.1 1000 Watt Dyno-Certified RMS (4000w Peak) Mono 1 Ohm Car Amplifier
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
• 1 Ohm: 1000 Watts x 1 Channel <1% THD+N (71% efficient)
• 2 Ohm: 700 Watts x 1 Channel <1% THD+N (81% efficient)
• 4 Ohm: 420 Watts x 1 Channel <1% THD+N (88% efficient)
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
• 1 Ohm: 4000 Watts x 1 Channel
• 2 Ohm: 2800 Watts x 1 Channel
• 4 Ohm: 1600 Watts x 1 Channel
• Power/Protect/Clip LED Indicators on the front panel
• High-Speed MOSFET Power Supply
• High Performance Class D Technology
• Bass Boost @45Hz: 0dB-12dB
• Low Pass Filter: 45Hz - 200Hz
• Subsonic Filter: 10Hz - 50Hz
• Full IC-Controlled Protection Circuitry
• Remote Subwoofer Control
• Mute and Delay Soft Start System
• RCA Preamp Line Output (Tiffany style terminals)
• 8 Volt Preamp Circuitry
• Status Mode LED Indicator
• Minimum THD at Rated Power: <0.5%
• A Weighted Signal to Noise (per CEA 2006 Standard): -82.9dBA
• Frequency Response: 10Hz - 200Hz
• Damping Factor: >150 @ 100Hz
• Remote Level Attenuation: 0 to -26dB
• Useable Input Signal Voltage Range into 4 ohm load: 264mV – 8.0V
• Actual Maximum THD+N at 4 Ohm rated power: 0.4%
• 4 x 25 Amp Maxi Fuse (Built in)
• 4 Gauge Power and Ground Terminals
• 8 Gauge speaker wire terminals
• Dimensions: (W x H x L) 11.5” x 4.9” x 1.8"

---

Video of RWK41:

Unboxing Video for RWK41:

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables.

2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.

This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.

Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
  
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
  
• 17’ – 18 Gauge Blue Remote Cable
  
• 17' 16 Gauge Translucent Blue SuperFlex
  
• 3' 4 Gauge Translucent Black SuperFlex Ground Wire
  
• Gold Plated AGU Heat Resistant Fuse Holder
  
• 60 Amp AGU Gold Plated Fuse
  
• 7’ Split Tube Loom
  
• Fuse value 100 Amp AGU Gold Plated Fuse
  
• Soft abrasion proof insulating jacket allows for 100" improved flexibility
  
• PVC outer jacket can withstand an extreme temperature range of -40 to 220 degrees F
  
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.