Welcome! You are bidding on ONE 8 ml SYRINGE of XADO EX120 Revitalizant for Gearboxes Reinforced revitalizant!
Extreme Action 120% (EX120) Revitalizant restores, repairs, and safeguards worn metal in manual transmissions. It begins by filling scratches and worn areas on the metal (gears, bearings, distribution blocks, clutches, etc.), regenerating geometry and reversing damage. EX120 then coats the surfaces with a ceramic-metal layer, providing lasting protection from future wear. EX120 is compatible with manual and robotized transmissions, sequential gearboxes, including Direct Shift types, transfer cases, and differentials. The best part is that one treatment lasts up to 62,000 miles!
With a 20% increase in active agent concentration, Extreme Action 120% (EX120) Revitalizant is more effective than ever at repairing, rebuilding, and protecting worn metal surfaces. One complete revitalization cycle lasts for 62,000 miles. XADO’s Revitalizant technology has been independently tested and proven to be effective.
*Compared to XADO gel-revitalizant for gearboxes, transfer cases, and differentials.
Despite regular maintenance, manual transmissions inevitably suffer from metal wear due to high heat and friction, leading to scratches and deformations over time. The surface layer is damaged in high-friction zones, where entire atom clusters may detach under heavy loads. Until now, reversing this metal wear was impossible.
EX120 starts repairing worn and scratched metal immediately after being added to the gearbox. It acts as a catalyst, rebuilding metal in areas exposed to excessive heat. It triggers the absorption of carbon through the surface layer, forming metal carbides. EX120 rebuilds metal on a molecular level, atom by atom. A durable protective coating is created with the help of carbides and metal particles. Since it has a self-regulating thickness, it doesn't accumulate. The diffusion of the protective layer into the metal results in a long-lasting gradient coating that exerts positive pressure across the entire treated surface in the final stage of revitalization. The metal is now rebuilt and protected by a diamond-like ceramic-metal film, ensuring smoother operation and a longer lifespan.
Seals up micro caverns and scratches on working surfaces;
optimizes contact areas in gear engagement;
provides significant fuel economy (especially for all-wheel drive vehicles);
reduces noise and vibration levels by 10 times;
increases accuracy of gear shifting;
improves operation of synchronizers;
allows to safely operate the transmission units for up to 1,000 km in case of emergency oil leak
Application instructions:
Dosage| Oil system capacity, L | 1-2 | 2-5 | 5-8 |
| Number of syringes (8 ml), pcs | 1 | 2 | 3 |
| Treatment procedure | Single | Single | Single |
Revitalization is considered complete after 50 hours of operation or approximately 1,500 km of driving.
A noticeable reduction in noise from the mechanism within the first hours signals that the revitalization process has started. If the improvement in performance halts, it may point to severe wear—doubling the dosage is recommended in such cases. If no improvement is observed after 100–200 km of driving, the issue may stem from incorrect diagnostics.
Revitalizant is fully compatible with all kinds of mechanical transmission oils. It does not chemically react with them and does not affect their viscosity or physical-chemical properties.
A protective ceramic-metal coating develops on any functional mechanism. However, if the component is critically damaged (100% wear), worn-out parts must be replaced before use.
Package:
1 syringe (8 ml) of XADO EX120 Revitalizant for Gearboxes