Key Features

High Efficiency: The 1100W pure copper motor with 1.5HP and high rotation speed (3450r/min), efficient impeller, and airflow ventilation make this pump produce a high flow rate (100.4GPM) to quickly&smoothly filter the circulating water and keep the swimming pool clean while conserving energy.

High Safety: The UL certification, thermal overload protection, and pressure protection improve the pump's safety, so you can use it with confidence. The F-class insulation and IP X5 protection grade allow for use in water for a long time.

Consistent Performace: It adds running capacitors on the basis of the original motor to reduce the motor temperature and energy consumption for longer service life.

Low Noise: The low noise (less than 75dB) produced by the motor can bring you a quiet environment and protect your hearing.

Simple Installation: The equipped 1/2" NPT American standard internal thread connectors and other useful accessories allow you to install this pool pump without hassle.

Details

Filter Basket with Clear Cover: The extra-large filter basket allows for easy leaf/debris/hair/lint removal, ensures free flow, and extends the time between cleanings. Its removable design allows for easy cleaning. And the lockable clear cover helps determine if the basket needs to be cleaned and ensures safe closing.

O-shaped Sealing Ring: The heat-resistant O-shaped sealing ring between the filter basket and the filter pipe can effectively strengthen the sealing of the filter port and avoid water leakage during operation.

Drain Plug: You just need to open the cap of the drain plug at the bottom to easily drain water, which can avoid water accumulation in winter, facilitate pump maintenance, and prevent it from affecting normal operation.

Application

It is mainly used for in/above-ground pools, hot tubs, and spas in all types and sizes. It is also widely suitable for water circulation in hotels, restaurants, aquaculture, hydro massage baths, spas, jets, rinses, and other filtration systems, and also does water circulation and filtration in water treatment facilities and decorative pools and other circulation systems.

Specification

Pump Model: HBP1100

Motor Model: HT-13

Color: Black

Material: Iron, PP

Processes: Injection Molding, Electroplating

Style: Modern

Power Source: Corded Electric

Plug: US Standard

Motor Type: Single-speed Pure Copper Motor

Noise: ＜75dB

Voltage: 110-120V, 60Hz

Power: 1100W, 1.5HP

Current: 9.1A

Flow: 350-180L/min, 92.46-47.5GPM

Maximum Flow: 380L/min, 100.4GPM

Head: 5-10m/16.4-32.8ft

Maximum Head: 12.5m/41ft

Rotation Speed: 3450r/min

CAP: 124-148μF

I.CL.: 155(F)

Protection Grade: IP X5

Insulation Class: F Class

Max. Temperature: 50℃/122℉

Inner Coupling: 1/2" NPT

Connector Diameter: 48.5mm/2inch

Cord Length: 95cm/37.4inch

Net Weight: 13kg/28.66 lbs

Gross Weight: 13.3kg/29.3 lbs

Package Size: 62*24*35cm/24*9.45*13inch

Package Included

1* Pool Pump

1* English Manual

Other Accessories for Assembly

Notes

• This pump is for use with permanently installed pools only. Please do not use it with storable pools.
• Please fill the pump with water before use to prevent the motor from overheating and avoid damage to mechanical seals and impellers.
• This pump can only be installed and repaired by qualified professionals. All wiring must be carried out by licensed electricians to ensure compliance with all state and local regulations.
• To reduce the risk of electric shock, please install it at least 10ft from the inside walls of a pool and do not use an extension cord to connect the unit to the electric supply. Please connect it to a grounding-type receptacle protected by a ground-fault circuit interrupter (GFCI).
• For the safety of your device, please do not cut the power cord without authorization during use, and it's advised to protect electrical components from the weather.
• If your swimming pool has a salt generator, it will be the last component before the water returns to the swimming pool.
• Please allow the slight color difference caused by the shooting light and the 1-3cm error due to manual measurement, and make sure you do not mind before ordering