Handheld Digital LCR Meter Frequency 100Hz 120Hz 1kHz 10kHz with DCR Function 

Note: Battery not Included During The Shipping !!!

Introduction:

1. With its advanced impedance test technology. This series currently possess the most powerful functions and outstanding performance in this industry comparable with bench LCR meters.

2. TH2822 series apply the ultra-low power consumption design and high density SMD assembly techniques and can simultaneously display primary and secondary parameters on a LCD display with backlight. The dual-color shell is gorgeously once shaped; and functions are easy to operate. The test frequency is up to 100 kHz, the readings of primary parameter 40,000 counts and the resolution of dissipation factor 0.0,001. Accurate and convenient measurements of passive-components can be achieved in different occasions for a long time. 

3. With USB interface, TH2822 series can conveniently communicate with a PC and be remotely controlled by a PC. In order to satisfy the increasing test requirements for SMD and balance the different needs for performance and price, two types of 4-terminal Kelvin test tweezers: TH26009C and TH26029C are optional for users’ choice

Features:

• Max. Basic accuracy: 0.25%
• Maximum test signal frequency : 10kHz
• Selectable test signal level
• With DCR function
• Enhanced protection capability of input terminal impact
• 40000 counts for primary parameter, D/Q resolution 0.0001
• Typical ultra-low consumption: 25mA
• Innovatively compatible terminal configuration: 5-terminal test slot and 3-terminal rubber jack
• Intellectualized auto LCR function
• AC test speed up to 4 meas/sec (DCR: 3 meas/sec), fast automatic range switch design
• Constant 100Ω output impedance
• Percentage display and 4-tolerance comparator: 1/5/10/20%
• Battery charge in startup & shutdown
• Test terminal protection function
• Data-hold, Max./Min./Average value recording
• Real-time function configuration selection and working condition hold capacity
• Standard configuration Mini – USB communication interface and SCPI command set
• Free FastAccess PC communication software on our website
• Gorgeous dual-color cast shell

Specifications:

Model	-
Function
Test Parameter	Primary parameters: L / C / R / Z/ DCR Secondary parameters: D / Q / R /θ/ ESR
Equivalent Circuit	Series and Parallel
Parameter and Equivalent Mode	Hold, Auto
Ranging Mode	Auto
Measurement Terminals	3-terminal, 5-terminal
Measuring Speed	4meas/sec, 1.5meas/sec
DCR Measuring Speed	3meas/sec
Calibration Function	Open, short
Comparator Function	1%, 5%, 10%, 20%
Input fuse	0.1A / 250V
Interface	Mini-USB (virtual serial port)
Test Signal
Test Frequency	100Hz,120Hz,1kHz,10kHz
Test Level	0.3 Vrms, 0.6 Vrms, 1 Vrms
Output Resistance	100Ω
Display
Display	LCD Primary-Secondary dual display, with backlight
Reading	Max. Primary parameters: 40,000 digits, secondary parameters D/Q  Minimum resolution: 0.0001
Basic Accuracy	0.1%
Measuring Range
L	0.00μH - 1000.0H
C	0.00pF - 20.000mF
Z/R	0.0000Ω- 10.000MΩ
DCR	0.0000Ω- 20.000MΩ
ESR	0.0000Ω- 999.9Ω
D	0.0000 - 9.999
Q	0.0000 - 9999
θ	0.00°- ±180.0°
Power Requirements
Battery Model	LH-200H7C, 8.4V Ni-MH 200mAH rechargeable battery
AC Power Adapter	Input: 220V/50Hz, Output: 12V-15V(100Ω Load)
Standby Currant	11μA
Battery Life	16 hours (typical) , new alkaline battery, with backlight off
Auto Power Off	5min, 15min, 30min, 60min, OFF available; Factory Default : 5min
Low Voltage Indicator	When battery voltage drops below 6.8V, low voltage indicator turns on.