  |
||
Info about this article[Fast printing at up to 600 mm/s] - JAYO high-speed PLA filament is optimised for high-speed 3D printing. With 500% higher filament fluidity, it ensures faster melting at the hot end, smooth extrusion and no clogging, supports print speeds of 30-600 MM/s and ensures stable printing results at high speeds.
[Faster cooling and stable moulding] - with 180% improved heat dissipation, the high-speed PLA 3D printer filament cools faster after extrusion, adheres perfectly to the layers and ensures a smooth surface with clean, sharp print details after fast moulding. [High compatibility and settings] - High-speed PLA 1.75 mm filament is compatible with both normal and high-speed 3D printers. Depending on the performance of different printers, please adjust the parameters according to the recommended printing temperature and speed for better printing results. [Toughness and low shrinkage] - Compared to normal PLA filament, HS-PLA 1.75 is tougher and does not tear easily during fast printing. The low shrinkage of 0.3 % ensures stable prints, reliable printing and high precision. [1.75 mm filament diameter] - JAYO high-speed PLA 3D printing filament has a diameter of 1.75 mm, a dimensional accuracy of +/- 0.02 mm, an exact diameter and a clean winding for smooth feeding.
[Vacuum packing and bubble-free] - JAYO 1.75mm filament is vacuum packed and the desiccant can effectively avoid the moisture of the filament, keep it dry and print without bubbles. |
||
     |
||
|
How to store:
1.If you leave your printer idle for more than a few days, please retract the filament to protect your printer nozzle.
2.To prolong the life of your filament, please put the unsealed filament back into the original vacuum bag and store it in a cool and dry place after printing. 3.When you store your filament, please pass the loose end through the holes on the edge of the filament spool to avoid winding, so that it will be properly fed for the next use. |
