Description

LED voltage display remote control switch

Low voltage protection: When the voltage is lower than 11.8V, it will automatically power off. When the voltage is higher than 13.2V, the remote control will be disabled to prevent accidents.

[Specifications] Battery disconnect switch rated current: 240A, rated voltage: 12V, standby current: 1mA, instantaneous current: 500A.

[Magnetic lock function] This car disconnect switch adopts a new relay, which controls the circuit disconnection through the magnetic principle, and the standby current is 1mA, which is more energy-saving.

[Intelligent LED voltage display] The LED voltage display detects the battery voltage at any time. If the voltage is lower than 11.8V, the remote disconnect switch will automatically cut off the power after 120 seconds to save electricity. If the voltage is higher than 13.2V, the remote control will be disabled to prevent accidental power off while driving, and the power can only be controlled by the button on the switch.

[Easy to install] The power off switch adopts a negative connection to ensure stable performance. Please remember to turn off the power before installation.

[Battery Protection] Using this wireless car battery cut-off switch can avoid hidden extra power consumption caused by long-term parking, aging of electronic equipment, aging of lines, forgetting to turn off lights, etc. It can effectively protect and extend the service life of the car battery.

Product specifications:

Power supply voltage range: DC6-13.2V/DC19-28V

The indicator light shows (light is on, off is off)

Automatic poweroff point: 11.8V ± 0.2V / 23V ± 0.2V

Out-of-control voltage of remote control in driving: 13.3V ± 0.2V / 26V ± 0.2V

Remote control frequency: 433 (remote control matched, self-locking mode)

Product parameters:

Adaptive voltage: 12V/24V

Operating temperature: 30°C-90°C

Switching current rating: 240A

Switch instantaneous current: 500A

Deficit threshold: 11.8V ± 0.2V / 23V ± 0.2V

Power loss delay disconnects for 120 seconds

Standby power consumption: 0.001a

Note: the product works in the 6V-13.2V / DC19-28V range of the remote control only for normal pairing, and the remote control switch magnetic keeps the relay. Electrical appliances, when the supply voltage is below 11.8V / 23V, will delay 60 seconds alarm sound. The remote control cannot turn off the magnetic hold relay (ignition will also be). The manual button can turn off; it is 120 seconds off, and the magnetic hold relay is off. When the voltage is higher than 13.3V / 25V, the remote control function of the product fails to prevent accidental triggering during driving, resulting in driving power failure.

Package Includes：

1x Switch

2x Remote Control

1x Manual