|
|
|
|
|
|
Fitment:
2005-2010 Ford Mustang
Package Include：
1Pcs Brake Calipers
When to Replace Brake Calipers：
【Noise】Your brakes are continuously squeaking, squealing or grinding
【Brake Warning Light】Your brake or antilock braking system (ABS) warning light comes on
【Pulling】Your car jerks or pulls to one side when braking
【Soft Pedal】Your brake pedal feels unusually soft and spongy or hard
【Fluid leaks】You notice brake fluid leaks around the wheels or engine compartment
You need to pump your brakes for them to work properly
Construction of Brake Calipers:
1:Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor.
2:Pistons: These are cylindrical components located inside the caliper housing. When hydraulic pressure is applied, the pistons extend outward to push the brake pads against the rotor.
3:Seals and Dust Boots: These ensure a tight and reliable seal around the pistons, protecting them from dirt and contaminants. Proper seals are vital to prevent brake fluid leaks and maintain hydraulic pressure.
4:Brake Pad Clips: These clips securely hold the brake pads within the caliper.
5: Bleeder Screw: A small screw used to release air and excess brake fluid from the caliper during brake bleeding procedures.
Different Types of Brake Calipers:
1:Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
2:Fixed Calipers: Fixed calipers have pistons on both sides of the rotor, providing more even pressure distribution and improved braking performance. Unlike floating calipers, fixed calipers do not slide; they remain stationary during braking. This design reduces caliper flexing and ensures a more consistent brake pad-to-rotor contact.
3:Sliding Calipers: Sliding calipers are also known as pin-slide calipers. They have one or two pistons on one side of the rotor, similar to floating calipers. However, sliding calipers use pins or sliders to allow the caliper to move back and forth slightly during braking. This design helps equalize pressure on both sides of the rotor and promotes even brake pad wear.
Notice：
-Please check the detail model of your car accorrding to the compatibility table before purchasing.
-Professional installation is highly recommended (No Instruction Included)
-For any needs please contact us.
| Item Specifics | |
|---|---|
| Brand | shkj-motors |
| Manufacturer Part Number | SK181AA346tor |
| Placement on Vehicle | Right,Front |
| Warranty | 1 Year |
| Custom Bundle | No |
| Fitment Type | Direct Replacement |
| Mounting Hardware Included | Yes |
| Listing Include | One Piece Brake Caliper |
| Features | Positive Mold Technology |
| Copper Washers Included | Yes |
| Mounting Hardware | Yes |
| Brake Bracket Included | Yes |
| Grade Description | Premium |
| Finish | Zinc Plated |
| OE/OEM Part Number | 18B4928 Brake Calipers replacement |
| Bleeder Port Size | M10X1.5 |
| Inlet Port Size | M10X1.0 |
| Piston Material | Phenolic |
| Type | Brake Calipers & Bracket |
| Banjo Bolt Included | Yes |
| Material | High Quality Cast Iron,Aluminum |
| Brake Piston Count | 2 |
| Piston Size(mm) | 42.5 |
1，Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries.
2，All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.
3，We ship the package to your shipping address in eBay. Please tell us your shipping address if it is different from the one in eBay.
4，The tracking number will be given for the customer to check the shipping status online (registered or faster service only).
5，We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.
1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
1. 3 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
2. Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. we do not repair or replace items with an expired warranty.
You agree to all of the above-listed policies upon bidding on and winning this auction!
1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
2. It is impossible to address issues if we do not know about them!
Shop Category Hot Item
Picture
New List Item
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
Brake Calipers Front Right w/ Bracket Fits Ford Mustang 2005 06 07 08 09 2010
Fitment:
2005-2010 Ford Mustang
Package Include：
1Pcs Brake Calipers
When to Replace Brake Calipers： 【Noise】Your brakes are continuously squeaking, squealing or grinding 【Brake Warning Light】Your brake or antilock braking system (ABS) warning light comes on 【Pulling】Your car jerks or pulls to one side when braking 【Soft Pedal】Your brake pedal feels unusually soft and spongy or hard 【Fluid leaks】You notice brake fluid leaks around the wheels or engine compartment You need to pump your brakes for them to work properly
Construction of Brake Calipers: 1:Caliper Housing: The caliper's main body houses the other components and encloses the brake pads and rotor.
Different Types of Brake Calipers: 1:Floating Calipers: Floating calipers are the most common type used in modern vehicles. They have one or two pistons on one side of the rotor. When the brakes are applied, the caliper slides inward, causing the piston(s) to press the brake pads against the rotor. Floating calipers are relatively simple and cost-effective, widely used in various vehicles.
Notice： -Please check the detail model of your car accorrding to the compatibility table before purchasing. -Professional installation is highly recommended (No Instruction Included) -For any needs please contact us.
Pay attention to
1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.Local pick up is not available.
3.Orders Will be shipped out from our warehouse in US.
4.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to. Shipping
1，Product will be shipped within 2 business days after full payment is received and verified. Delivery Time is about 3-7 business days to most of countries. Returns
1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS! 2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable. Warranty
1. 3 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty. Feedback
1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
