Description:
NanoOil’s advanced nano-molecules deeply clean metal surfaces in your engine by removing carbon buildup and contaminants (decarbonization). These molecules penetrate micro-cracks in the metal, filling them to reduce surface friction without changing the surface structure.

✅ Increases cylinder compression for improved engine power without altering the original geometry.
✅ Replaces carbon buildup with a protective layer that lasts up to 50,000 km.
✅ Helps reduce friction, fuel consumption, engine vibration, and noise for up to 50,000 km.
✅ Dissolves carbon into a dye, so it won’t clog modern oil filters.

When to Use:
NanoOil can be added at any time, but it is ideal to use it approximately 2,000 km before your planned oil change for maximum cleaning and protection.

Recommended Usage:
 New engines (<10,000 km): 20g per 1L of engine oil (100g for 5L).
 Used engines (>10,000 km): 10g per 1L of engine oil (50g for 5L).
Transmissions: 20g per 1L of transmission oil (40g for 2L).

NanoOil 20.MSK is non-toxic (hazard class 4), non-explosive, and non-flammable, requiring no special handling precautions.

Benefits at a glance:
✅ Restores power and compression
✅ Lowers friction and fuel consumption
✅ Reduces engine noise and vibration
✅ Extends engine and transmission life
✅ Easy to use – just add to your oil

Perfect for cars, motorcycles, and heavy-duty engines seeking long-term protection and performance boost

NanoOil – 20.MSK
Ultimate Engine Wear and Carbon Build-Up Protection

Why Choose NanoOil? It Enhances Your Oil’s Performance:

✅ Dissolves carbon deposits in your engine, smooths out scratches and grooves in cylinders, and seals cylinder pressure.
✅ Reduces engine friction, lowering fuel consumption by 10–20%.
✅ Increases compression in cylinders by 10–20%, boosting engine power.
✅ Cleans carbon buildup within ~1,000 km after application (ideal to use before your next oil change).
✅ Extends engine lifespan significantly.
✅ Reduces engine friction up to 6 times, decreasing noise and vibration.
✅ One treatment lasts 25,000–30,000 km at 100% effectiveness; after 50,000 km, protection gradually diminishes.
✅ Provides temporary protection for up to 100 km even in the event of complete oil loss.

Originally Developed for the Russian Military:
NanoOil was specifically engineered as an additive for engine and transmission oils used in military vehicles. Even if your engine or transmission loses oil (due to puncture or leakage), lubrication functionality remains, protecting your engine under full load.

A nano-film remains on metal surfaces for up to 50,000 km, resisting freezing and dripping. NanoOil is used solely as an engine oil additive, serving as preventative protection. In the event of oil loss, it prevents engine seizure for at least 100 km of driving at full power.

Perfect for:
-Cars & trucks
️- Motorcycles
- Heavy equipment
-️ Anyone who demands maximum protection and performance from their engine.

Ready to extend your engine’s life while boosting its performance? Add NanoOil – 20.MSK to your cart now!

How to Apply NanoOil – 20.MSK Engine Additive

Applying NanoOil – 20.MSK is quick and easy:

1️.Start your vehicle and let the engine warm up to operating temperature, or drive a few miles to ensure the oil is warm and circulating evenly.
2️.Turn off the engine.
3️.Remove the oil filler cap.
4️.Inject the entire syringe of NanoOil into the oil filler opening.
5️.Replace the oil filler cap securely.
6. Restart the engine and let it idle for at least 15 minutes to ensure thorough mixing with the engine oil.
7️.For best results, drive the vehicle for at least 15 km (10 miles) after application.

Important:
NanoOil is a concentrate designed to mix with engine or transmission oil. For maximum effectiveness, the engine must be started after application to fully blend with the oil and activate its protective properties.

✅ After adding to transmissions (manual or automatic), a short drive is also recommended to ensure thorough mixing.

No further steps are needed. NanoOil maintains optimal protective properties for up to 25,000 km, with gradual efficiency reduction up to 50,000 km. For continuous protection against carbon build-up, it is recommended to apply a fresh dose of NanoOil after every oil change.

How NanoOil Works:

✅ Suitable for gasoline, diesel, and gas engines, NanoOil is added directly into the engine oil.
✅ NanoOil molecules chemically bond with engine oil molecules, filling microscopic cracks (“pores”) in metal surfaces and forming a protective nano-film.
✅ Its organic acid component dissolves carbon deposits into a dye, ensuring the engine remains clean.
✅ Fills micro-leaks in the engine, increasing cylinder compression by 10–20%, resulting in a 10–20% power boost.
✅ Reduces friction between metal parts up to 6 times, extending the lifespan of metal components while significantly reducing fuel consumption and vibration.

Protect your engine, enhance performance, and reduce fuel consumption effortlessly with NanoOil – 20.MSK.
Perfect for cars, trucks, motorcycles, and heavy machinery.

NANO OIL – Engine Oil Additive

Available Sizes:

· 1.06 oz (30g) 

· 1.41 oz (40g) 

· 1.76 oz (50g) 

· 2.12 oz (60g) 

· 2.47 oz (70g) 

(Prices exclude shipping. Contact us for combined shipping options.)

✅ What is NANO OIL?

NANO OIL is a high-performance engine oil additive designed to reduce friction, protect engine parts, and extend engine life. It uses advanced nano-particle technology to penetrate and smooth micro-irregularities on metal surfaces, reducing wear and improving engine efficiency.

️ Recommended Dosage:

· For new engines (under 6,200 miles):
Use 0.71 oz per US quart of engine oil.

· For used engines (over 6,200 miles):
Use 0.35 oz per US quart of engine oil.

⚙️ Key Benefits:

✅ Reduces friction and engine wear
✅ Improves fuel efficiency
✅ Enhances engine protection under high load and temperature
✅ Compatible with all gasoline and diesel engines
✅ Easy to use – simply add to warm engine oil

How to Apply:

1. Warm up the engine to normal operating temperature.

2. Turn off the engine and remove the oil filler cap.

3. Add the appropriate amount of NANO OIL directly into the oil filler opening.

4. Replace the oil filler cap and start the engine.

5. Let the engine idle for at least 15 minutes to ensure proper mixing.

The product originates from a Russian military program designed to maintain the functionality of engines and transmissions in the event of damage or loss of lubrication.