eBay

Condition: 100% new
Color: Black
Material: Rubber
Diameter: approx.250mm(10")
Width: approx.12.7mm(1/2")
Thickness: approx.3mm(0.12")
Suitable for: 10"(250mm) Band Saw Wheel (Advice Band Saw Blade Length is 1826mm)
Item included: 1 x Band Saw Rubber Band
Note:
1) All dimensions are measured by hand, there may be small deviations.

2) Color may vary slightly due to the color setting of each individual monitor.

3) In order to ensure that the anti-skid rubber ring can be tightly combined with the outer edge of the wheel, the circumference of all anti-skid rubber rings must be smaller than the circumference of the band saw wheel.

Product Dimension:

Feature:

1) 100% new and high quality.

2) Rubber band are tough and abrasion-resistant, not easy to loosen and break.

3) Anti-slip and anti-noise.

4) Allowing for optimal blade tracking, excellent traction, and preventing blade damage.

Installation Method:

1) Remove the damaged rubber ring. If there is rubber ring on the outer edge of the wheel, please clean up the first.

2) Soak the new anti-skid rubber ring in warm water for 3-5 minutes, and install it after the rubber ring is softened.

3) When installing, start from side of the wheel, press end of the rubber ring firmly into the groove on the outer edge of the wheel, and then use a flat-blade screwdriver to slowly pry the rubber ring into the groove on the outer edge of the wheel. Do not use too much force.

4) If necessary, you can place a few drops of glue along the grooves on the edge of the wheel to ensure a more secure installation.