ANCEL BST600 12V/24V Auto Battery Temperature Load Tester Car Cranking Charging System Analyzer 100-2000CCA for Trucks Cars Moto ANCEL BST600 battery tester is designed with convenience and broad functionality in mind. In addition to the printer function, it features a wide capability for the purpose of battery diagnosis and maintenance. It works on 12V and 24V battery systems, including the actual Cold Cranking Amps test, the health status test, and the diagnosis of both starting and charging systems for common faults. It also has an integrated printer capable of printing out test results for improved service. This tool lets you know the condition of the battery system in advance, saves a trip and money to an auto repair shop.
Features: 1) With real-time temperature monitoring, BST600 can determine the exact degree of influence of temperature on battery performance. 2) Anti-reverse connection and high voltage protection prevent user from damaging the instrument in case of malfunction. 3) Real-time display and supports for 10 languages. 4) With data storage, previously measured data can be reviewed at any time. 5) The testing standards conform to most of the battery standards in the world.
ANCEL BST600 12V 24V BATTERY ANALYZER WITH PRINTER 1. Tests 12V & 24V battery, cranking system, and charging system.
Engine System Activation Load Test Start the engine to make the tester record the lowest voltage in this process automatically. For the 12V system, the standard voltage is 9.6V; for 24V system, the standard voltage is 16V. If the lowest voltage is higher than the 9.6V (for the 24V system, the lowest voltage is over 16V), the system is good. If the lowest voltage is lower than the standard voltage, the system is not good. Maximum Load System Test For the 12V system, the standard voltage is 12.8V, for the 24V system, the standard voltage is 25.6V. If the lowest voltage is higher than the 12.8V (for the 24V system, the lowest voltage is over 25.6V), the system runs normally. If the lowest voltage is lower than 12.8V (for the 24V system, the lowest voltage is under 25.6V), please check if the engine belt is damaged and the wires are short-circuited. Charging System Test For the 12V system, the standard maximum voltage is 15V, the standard minimum voltage is 13.3V; for the 24V system, the standard maximum voltage is 30V, the standard minimum voltage is 26.6V. If the current voltage is higher than 15V or 30V, please check the voltage regulator. If the current voltage is lower than 13.3V or 26.6V, please check the connections, wires, and engine. MUTI-LANGUAGE OPTIONS: English,Spanish,Japan,Deutsch,Polski,Chinese,Italiano,Russian,Francais,Nederlands
The Printer doesn't work or paper tape jams ? We will 100% check whether the product has printing problem before shipment, so the probability of failure is very low.Most of the problems are caused by improper operation. what size is the Thermal paper ? thermal paper size: 2 1/4" W X 1 1/5" D ( 57mm W x 30 mm D ) Does this require installing a 3V coin cell battery to update the printed time ? It's up to you, The 3V coin cell battery (button battery,such as CR2032) just provides power for updating the date & time,the printed date & time will be more accurate after installation.Notice:button battery can be installed on the back, it is not included. |
