Store Categories
Details
1: Wide range of applications
2：Easy to use
3：Stable performance
4: Small size
5：High cost performance
Specification Model：XH-M139
Voltage：DC12-24v
Power：2*50W+100W
Output load 4-8 ohms
There will be enough output power only when the audio input is sufficient and the power supply voltage/current is sufficient. Higher power supply voltage will be relatively more powerful, and speakers with different impedance will have different output power. With sufficient voltage and current, the higher the speaker ohms, the lower the relative sound power, please note!
1*Domestic chip 2.1 channel digital amplifier board DC12V-24V 50WX2+100W
Two high quality TPA3116D2 digital amplifier chips are used.
Very good sound quality, high efficiency and power amplification.
50W * 2 + 100W 2.1 channels (left/right channel and subwoofer channel), high efficiency and low heat.
Equipped with DC 12-24V, wide input voltage.
Users can easily adjust the volume themselves.
Applicable speaker impedance: 4-8 ohms.
Just connect the power supply and speakers and enjoy pure digital music!
This amplifier board must be powered by a DC power supply (DC 12-24V), preferably with a high-performance switching power supply. Do not use a transformer!
Supply voltage: DC 12-24V
Chip: TPA3116 * 2
Channel type: 3 channels (left channel, right channel, subwoofer)
Output power: 50W * 2 + 100W * 1 subwoofer
Output matching: 4-8 ohms
Audio output: Terminal
Frequency response range: 14-100KHz
Signal to Noise Ratio: 100dB
Switching frequency: 1.2MHz
PCB board size: 100 * 70 * 30mm/ 3.94 * 2.75 * 1.18in (L * W * H)
Weight: 113g / 3.98oz
Package size: 13.5 * 11 * 5cm/ 5.31 * 4.33 * 1.97in (L * W * H)
Package weight: 178g / 6.3oz
Packing list：
1 * 2.1 channel audio amplifier board
This is the description of Payment Method.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way.
Copyright©2017 DataCaciques
Details
1: Wide range of applications
2：Easy to use
3：Stable performance
4: Small size
5：High cost performance
Specification Model：XH-M139
Voltage：DC12-24v
Power：2*50W+100W
Output load 4-8 ohms
There will be enough output power only when the audio input is sufficient and the power supply voltage/current is sufficient. Higher power supply voltage will be relatively more powerful, and speakers with different impedance will have different output power. With sufficient voltage and current, the higher the speaker ohms, the lower the relative sound power, please note!
1*Domestic chip 2.1 channel digital amplifier board DC12V-24V 50WX2+100W
Two high quality TPA3116D2 digital amplifier chips are used.
Very good sound quality, high efficiency and power amplification.
50W * 2 + 100W 2.1 channels (left/right channel and subwoofer channel), high efficiency and low heat.
Equipped with DC 12-24V, wide input voltage.
Users can easily adjust the volume themselves.
Applicable speaker impedance: 4-8 ohms.
Just connect the power supply and speakers and enjoy pure digital music!
This amplifier board must be powered by a DC power supply (DC 12-24V), preferably with a high-performance switching power supply. Do not use a transformer!
Supply voltage: DC 12-24V
Chip: TPA3116 * 2
Channel type: 3 channels (left channel, right channel, subwoofer)
Output power: 50W * 2 + 100W * 1 subwoofer
Output matching: 4-8 ohms
Audio output: Terminal
Frequency response range: 14-100KHz
Signal to Noise Ratio: 100dB
Switching frequency: 1.2MHz
PCB board size: 100 * 70 * 30mm/ 3.94 * 2.75 * 1.18in (L * W * H)
Weight: 113g / 3.98oz
Package size: 13.5 * 11 * 5cm/ 5.31 * 4.33 * 1.97in (L * W * H)
Package weight: 178g / 6.3oz
Packing list：
1 * 2.1 channel audio amplifier board
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.