Features:

1.Easy to use, quick and light in appearance

2.This product can link with global 4 hole teeth chair.

3.Product use for：to increase viscosity of the touch surface , roughening

the surface of compound material metal ,porcelain crow,fiber post,inlay surface.

Specifications:

1.Link way:4 hole teeth chair general autoclavable.

2.Opertion air pressure:0.3Mpa-0.4Mpa

3.Sand amount:1.5g/min-3.59g/min

4.Blasting hole:Φ0．5mm

5.Blasting head can rotate to 360°

Installation:

Plug your quick coupling directly to this unit, the installation is finished.

caution: You must check if there is remaining water in the handpiece cable before installation.

If there is, you must dry it

firstly, then install it.

Recommended powder

We recommend a particle size of 20 to 80 μm high purity powder (99%+).

It's easy for the powder to absorb moisture from the air , It would cause agglomeration, resulting in performance

degradation. After install the powder, you should closed the cover of the bottle immediately

to make sure its tight cover.

The dry powder should flow freely, the wet powder does not flow easily or lumps.

Extraoral application

For surface cleaning and micro-roughening treatment before pasting

metal/Porcelain

Fiber post

Inlay/Onlays

maryland bridge

Orthodontic bracket

removing the cement in the original adhesive layer before second pasting

Cast metal prosthesis defect detection

Application in oral

In the repair treatment, micro roughen surface of porcelain or composite.

Package Included:

Handpiece

powder jar

Steel Needle

mini wrench