13 in Sand Filter Pump for Above Ground Pools
2640 GPH Flow Rate | 55.1 lb Sand Capacity | 24-Hour Timer | 7-Way Valve | Self-Priming Motor
Product Overview
This 13-inch sand filter pump is designed to provide efficient water circulation and filtration for above-ground pools and selected in-ground pools. Featuring a powerful copper motor, built-in 24-hour timer, self-priming capability, and a versatile 7-way multi-port valve, it helps maintain clean pool water with minimal maintenance.
Key Features
- Efficient & Energy-Saving Performance: Supports up to 55.1 lbs of filter sand with a maximum flow rate of 2640 GPH and a maximum head height of 33 ft. Designed to efficiently match the operating requirements of most above-ground pools while reducing energy consumption.
- 7-Way Multi-Port Valve: Includes seven operating modes: Filter, Backwash, Rinse, Waste, Recirculate, Winter, and Closed. The Recirculate mode returns water directly to the pool without passing through the sand tank, making it suitable for chemical mixing and equipment protection.
- Built-In 24-Hour Timer: Integrated timer and automatic daily cycle function allow the pump to start and stop according to your selected schedule for convenient pool maintenance.
- Durable Corrosion-Resistant Construction: Features a stainless iron motor shaft designed to resist corrosion caused by moisture and pool chemicals. The durable PE filter tank provides excellent resistance to weather and outdoor conditions.
- Pure Copper Motor: Powered by a copper motor for reliable operation and long service life. The self-priming design provides a maximum suction height of 4.9 ft (1.5 m) for stable water circulation.
Specifications
- Filter Tank Size: 13 in
- Maximum Flow Rate: 2640 GPH
- Maximum Head Height: 33 ft
- Sand Capacity: 55.1 lb (#18)
- Self-Priming Height: 4.9 ft (1.5 m)
- Motor: Pure Copper Motor
- Motor Shaft: Stainless Iron
- Tank Material: PE
- Timer: Built-In 24-Hour Timer
- Valve Type: 7-Way Multi-Port Valve
- Waterproof Rating: IPX5
- Filter Balls: 800 g / 1.8 lb
- Power Cord Length: 1.9 m / 6.2 ft
- Max Water Temperature: 40 ℃ / 104 ℉
- Inlet / Outlet Thread: G1-1/2"
- Hose Size: 1-1/4’’ (32 mm) x 17.7’’
- Hose Adapters: 5 x (1-1/4" & 1-1/2")
Recommended Pool Size
- Above-ground pools
- In-ground pools up to 10,476 gallons (approximately 6-hour runtime)
- In-ground pools up to 13,968 gallons (approximately 8-hour runtime)
-
How to avoid installation water leakage?
Our pump comes with O-rings. Just install them properly at all joints and wrap sealing tape on the threaded connections — no leaks.
-
Is installation easy with a detailed instruction manual?
Better than a manual — check the installation video on our product page. We walk you through every step.
-
How is the water circulation & running noise of the pump?
Our 0.55 HP pump delivers 2640 GPH flow and 33 ft max head — strong circulation. Plus, it's water-resistant and quiet.
-
What pool gallonage can this filter work with, and what hose sizes fit the pump?
It is suitable for above-ground pools from 10,000 to 14,000 gallons. The filter tank accepts 55.1 lbs of #18 silica sand or 1.8 lbs of filter balls.
-
Does it feature a 24-hour programmable run timer?
Yes — rainproof digital 24-hour timer with continuous & single-cycle modes. Saves you daily manual work and energy. Long-press to stop early.
