Features:
1. Small size, easy to operate, light weight, single-handed operation, all-aluminum machine, very durable.
2. Simple and light design, unique pressing method, easier replacement of the belt
3. The angle of grinding can be adjusted as needed
4. Ball bearing structure design ensures that the belt will not be displaced during the grinding process.
Parameter:
No load speed: 15000RPM
Belt size: 10x330MM
Air inlet: 1/4"
Air hose: 3/8"
Air consumption: 6CFM
Working pressure: 90PSI
Weight: 1KG
Use pneumatic tools to suggest:
Inject 2-3C.C. #60 pneumatic lubricant (cloth oil) before and after use every day.
Please freely run for a few seconds after oiling
Generally, the conventional air compressor, the air compressor compresses out most of the gas in the gas source, and the oil in the air compressor brought out by the air compressor piston. If the oil water separator is not used, the water and oil are gas. When entering the pneumatic tool, the wind blade will stick. If the tool moves together, the blade will not open. It may not start. If it can start, it will become insufficient torque. Be sure to inject the pneumatic oil from the rear air inlet and then press the pneumatic tool. After a few seconds of idling, the torque can return to normal.
