Note:

If you can't confirm 100% fit, please send us the part number(s) and picture of your original product.

Or send us the year, model and engine displacement of your car.


Part Number:

3641050-FS01, 3641050FS01, 3641050 FS01

DFSK-1241, DFSK1241, DFSK 1241

Frequency: 433MHz
 
Package Include: 4 x TPMS Sensor(Tire Pressure Monitoring Sensor)


Application (for reference only):

For DFSK 500 2021/01-2025/12
For DFSK 580 2019/01-2025/12
For DFSK 580 EV 2019/01-2023/12
For DFSK 580Pro 2019/08-2020/12
For DFSK E3 2019/01-2023/12
For DFSK ix5 2018/01-2025/12
For DFSK ix7 2019/11-2023/12
For DFSK S560 2019/08-2023/12
For DFSK S580 2024/03-2025/06
For DFSK Landian E3 2023/11-2025/06
For DFSK Landian E5 PLUS 2025/05-2025/12
For DFSK Landian E5 2023/03-2025/06
For DFSK S513 2020/01-2020/12
For SERES AITO M5 2022/01-2025/03
For SERES AITO M7 2022/01-2025/08
For SERES AITO M8 2025/04-2025/12
For SERES AITO M9 2023/12-2025/12
For SERES SF5 2021/04-2024/06

For FENGON 500 2021/01-2025/12
For FENGON 580 2019/01-2025/12
For FENGON 580 EV 2019/01-2023/12
For FENGON 580Pro 2019/08-2020/12
For FENGON E3 2019/01-2023/12
For FENGON ix5 2018/01-2025/12
For FENGON ix7 2019/11-2023/12
For FENGON S560 2019/08-2023/12
For FENGON S580 2024/03-2025/06
For FENGON Landian E3 2023/11-2025/06
For FENGON Landian E5 PLUS 2025/05-2025/12
For FENGON Landian E5 2023/03-2025/06
For FENGON S513 2020/01-2020/12 For FENGON S513 2020/01-2020/12


【No sensor programming Required】:

The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scal tool or "re-learning".

Simplified Relearn : OBDII required

*Installation of TPMS is recommended to be performed only by trained professionals.
 

Installation Process

1. Loosen the tire: Remove the valve cap and core and deflate the tire.

2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.

3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.

4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.

5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.