Description
Piezoelectric Ceramic PZT Driver Controller Module 130V High Voltage Output OP AMP Module DC-5V
Attention:
(1) The interface of our module is clear, featuring stable performance. Please combine the information provided by our store to do functional verification corresponding to experimental conditions.
(2) The basic parameters of the module are mentioned below. Schematic diagrams, PCB and other engineering files are not provided. If you has operational problems, please consult customer service.
(3) Before using the module, please read the information of this module, understand the power supply and usage restrictions, and avoid damage to the module due to improper operation.
(4) Our store modules guarantee to provide real module parameters, functions and pictures. All modules have passed inspection before shipment.
Description:
The piezoelectric ceramic driver is a high-voltage output linear adjustable driver module. Its highest output voltage can reach 130V, and it is usually used in pulsed light conversion and some piezoelectric ceramic drive places. The maximum rise time of the module is 5uS, and the smaller rise time improves the accuracy guarantee in the field of biomedical sensors, especially in ultrasound imaging.
The output of the module is linear amplification, which can input all zeros or more arbitrary waveform amplification output. And the module magnification is adjustable from 10-44 times, realizing a very wide dynamic range. The module is compatible and adaptable to most piezoelectric ceramics. The module is also suitable for optical applications such as CCD imaging and avalanche photodetection, and can be used for high-speed photodetection, light pulse detection, fluorescent substance detection, and so on.
Module Parameters:
- Module model: piezoelectric ceramic driver
- Module type: high-voltage drive
- Module power supply voltage: DC 5V
- Module power supply current: 1A
- Input impedance: 10K
- Input signal type: arbitrary waveform
- Input signal amplitude: 0-15V (all signals should be above 0)
- Input signal frequency: 40K (sine wave)
- Output voltage: 130V (MAX.)
- Magnification: 10-44 times adjustable
- Rise time: 5uS (MAX.)
- Module output current: less than 10mA
- Module protection: power supply reverse connection protection
- Module weight: 55g/0.1 lb
- PCB size: 79 x 46 x 19mm/3.1 x 1.8 x 0.7" (LxWxH)
- Module heating: no heat sink (no heat dissipation required for normal operation)
- Module heating factor: Power supply voltage is too large to damage the chip or the module is damaged
- Module working temperature: -25â to 75â (industrial grade)
- Module features: output power supply LED indication, adjustable voltage output
- Application range: photoelectric drive, piezoelectric ceramic drive, PZT drive control, etc.
- Module interface type: SMA signal input, 3.81-2PIN output, DC5.5*2.1 power socket
Package Included:
- 1 x Set of PZT Driver
Precautions:
(1) The module requires a 5V DC power supply, and the voltage cannot exceed 5.5V.
(2) Since the module is a high-voltage output device, users need to pay attention to their own safety.
(3) For the output signal, it is recommended to use a good wire for input and output signals to ensure a good grounding. When measuring high voltage, please use a high-voltage attenuation probe. Poor contact or poor-quality wire may cause signal attenuation or excessive noise.
(4) Since the output voltage of the module is high, pay attention to the load used not to be short-circuited or over-current, otherwise the module will be damaged.
Attention:
(1) The interface of our module is clear, featuring stable performance. Please combine the information provided by our store to do functional verification corresponding to experimental conditions.
(2) The basic parameters of the module are mentioned below. Schematic diagrams, PCB and other engineering files are not provided. If you has operational problems, please consult customer service.
(3) Before using the module, please read the information of this module, understand the power supply and usage restrictions, and avoid damage to the module due to improper operation.
(4) Our store modules guarantee to provide real module parameters, functions and pictures. All modules have passed inspection before shipment.
Description:
The piezoelectric ceramic driver is a high-voltage output linear adjustable driver module. Its highest output voltage can reach 130V, and it is usually used in pulsed light conversion and some piezoelectric ceramic drive places. The maximum rise time of the module is 5uS, and the smaller rise time improves the accuracy guarantee in the field of biomedical sensors, especially in ultrasound imaging.
The output of the module is linear amplification, which can input all zeros or more arbitrary waveform amplification output. And the module magnification is adjustable from 10-44 times, realizing a very wide dynamic range. The module is compatible and adaptable to most piezoelectric ceramics. The module is also suitable for optical applications such as CCD imaging and avalanche photodetection, and can be used for high-speed photodetection, light pulse detection, fluorescent substance detection, and so on.
Module Parameters:
- Module model: piezoelectric ceramic driver
- Module type: high-voltage drive
- Module power supply voltage: DC 5V
- Module power supply current: 1A
- Input impedance: 10K
- Input signal type: arbitrary waveform
- Input signal amplitude: 0-15V (all signals should be above 0)
- Input signal frequency: 40K (sine wave)
- Output voltage: 130V (MAX.)
- Magnification: 10-44 times adjustable
- Rise time: 5uS (MAX.)
- Module output current: less than 10mA
- Module protection: power supply reverse connection protection
- Module weight: 55g/0.1 lb
- PCB size: 79 x 46 x 19mm/3.1 x 1.8 x 0.7" (LxWxH)
- Module heating: no heat sink (no heat dissipation required for normal operation)
- Module heating factor: Power supply voltage is too large to damage the chip or the module is damaged
- Module working temperature: -25â to 75â (industrial grade)
- Module features: output power supply LED indication, adjustable voltage output
- Application range: photoelectric drive, piezoelectric ceramic drive, PZT drive control, etc.
- Module interface type: SMA signal input, 3.81-2PIN output, DC5.5*2.1 power socket
Package Included:
- 1 x Set of PZT Driver
Precautions:
(1) The module requires a 5V DC power supply, and the voltage cannot exceed 5.5V.
(2) Since the module is a high-voltage output device, users need to pay attention to their own safety.
(3) For the output signal, it is recommended to use a good wire for input and output signals to ensure a good grounding. When measuring high voltage, please use a high-voltage attenuation probe. Poor contact or poor-quality wire may cause signal attenuation or excessive noise.
(4) Since the output voltage of the module is high, pay attention to the load used not to be short-circuited or over-current, otherwise the module will be damaged.
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
