iPoster OEM White 4-LEDS Rear View Backup Camera & 4.3" Replacement Mirror Monitor For Most of Toyota Jeep Ford cars
- Replacement rear view mirror monitor. This 4.3 inch mirror monitor features OEM replacement design, which easily replace your existing rear view mirror and seamlessly integrate into your vehicle for a factory-like and clean install.
- Acts like regular reflective Rear View Mirror as well as a LCD monitor. This replacement rear view mirror display acts like regular reflective rear view mirror as well as a HD LCD monitor.
-
CCD image sensor, 600TV lines. Unlike other sellers that use cheap CMOS, our tailgate handle backup camera uses CCD sensor and has a resolution of 600TV lines, which means you can get very good video image.
-
Wide Voltage Design. 9-12V design to help protect camera kit from voltage fluctuation.
-
100% waterproof. The backup camera is completely weather proof with a IP68 rating.
Item Features:
-
Replacement car rear view monitor.
-
4.3 inch TFT LCD display screen.
-
HD 800*480 resolution.
-
Special metal bracket perfect match your car.
-
Auto switch to rear view image when you hand to reverse gear.
-
Power: DC 12V, ≤ 2W.
-
2 Video input: AV1 for VCD/DVD, AV2 for rear view camera
Specification:
* Image Sensor: CCD
* TV system: NTSC
* Horizontal Resolution: 520 TV lines
* Effective pixels: 820 x 740 pixels
* Minimum illumination: 3Lux / F1.2 (0 Lux with IR on)
* Night Vision: 10m meters
* Lens: 2.8mm /170 degree
* Diagonal Viewing Angle: 170 degree
* Synchronization: Internal synchronization
* Signal to noise ratio: >48db
* Video Output: RCA interface, 1.0Vp-p, 75Ohm
* White Balance: Auto
* Power: DC 12V
* Current Consumption: 130mA
* Operating Temperature: -10 to 50 degree centigrade, RH95% Max.
* Storage Temperature: -30 to 60 degree centigrade, RH95% Max
* Video cable length: 6m
* Power supply cable length: 150cm
* Camera dimensions: 21 X 23mm
Installation:
Connect the yellow video output connector to terminal display device
Connect the black power input connector to power output device
* TV system: NTSC
* Horizontal Resolution: 520 TV lines
* Effective pixels: 820 x 740 pixels
* Minimum illumination: 3Lux / F1.2 (0 Lux with IR on)
* Night Vision: 10m meters
* Lens: 2.8mm /170 degree
* Diagonal Viewing Angle: 170 degree
* Synchronization: Internal synchronization
* Signal to noise ratio: >48db
* Video Output: RCA interface, 1.0Vp-p, 75Ohm
* White Balance: Auto
* Power: DC 12V
* Current Consumption: 130mA
* Operating Temperature: -10 to 50 degree centigrade, RH95% Max.
* Storage Temperature: -30 to 60 degree centigrade, RH95% Max
* Video cable length: 6m
* Power supply cable length: 150cm
* Camera dimensions: 21 X 23mm
Installation:
Connect the yellow video output connector to terminal display device
Connect the black power input connector to power output device
Package Content :
- 1 X Backup camera
- 1 X 4.3 Inch Rear View Mirror Monitor
- 1 X video cable
- 1 X power cable
- 1 X Instruction manual