J-B Weld ClearWeld is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile,
most plastics, ceramic, glass, wood and metal.
ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil.
ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour.
With a tensile strength of 3900 PSI,
ClearWeld sets to a hard, permanent bond.
Great For:
Tile
Most Plastics
Ceramic
Glass
Wood
MetalInstructions
PREPARE:
1. Clean repair area of dirt, grease, oil, paint, rust etc. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide best repair.
MIX:
2. After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix.
APPLY:
3. Press with appropriate tool in an even coat, weld beard or extruded shape as needed.
DRY:
4. Sets in 5 minutes. Cures in 1 hour. If temperature is below 40ºF, then set time will be longer.
