eBay

Machinery Sliders 4ct, 10-ton Cap Each, Moving Heavy Machines, Equipment MSMD-4

These are for: MULTI-DIRECTIONAL USE IN WHICH YOU PLACE A 1" BOLT/PIN THROUGH THE COLUMN/POST OF THE MACHINERY OR EQUIPMENT. 8" wide x 1" high.

Introducing Machinery Sliders, the best-kept secret in the machinery moving and rigging industry. These light-weight marvels redefine machinery moving, offering unparalleled safety, user-friendliness, and cost-efficiency compared to traditional dollies and skates. Crafted from high-performance engineered plastic, Machinery Sliders are non-point loading, maintenance-free, and suitable for use in clean-rooms. Choose from two types: the pointed single-direction slider, measuring 3/8" high, 8-1/4" wide, and 11-1/2" long, or the round-shaped 360-degree multi-directional slider, standing 1" high and 8" in diameter. Remarkably versatile, they are capable of carrying approximately 10 ton each, and additional sliders can be added for heavier machinery. The lightweight design not only makes Machinery Sliders easy to handle but also reduces the risk of injury. With their low height clearance, these sliders excel in various applications where traditional methods fall short. Whether moving over damaged concrete, wood, tile, asphalt, or even carpet, Machinery Sliders provide a solution. Machinery Sliders greatly reduce the hazards of machinery tip-overs and unstable loads by not having wheels as well as being very low profile compared to old-styled dollies and skates. Ideal for diverse surfaces, including dock-plates, shipping containers, trucks, and solid surfaces, these sliders prove their worth in moving heavy machinery with unparalleled ease. Utilize Machinery Sliders during the loading of large and tight-fitting machinery in shipping containers, leaving them in place due to their cost-effectiveness. From machinery to a wide array of applications, Machinery Sliders redefine the standards of machinery moving, making them an indispensable asset to any

Machinery Sliders are the best kept secret in the machinery moving and rigging industry because they are very light-weight, extremely safe to use, user-friendly and cost a fraction of what traditionally machinery moving dollies and skates cost. They are non-point loading, maintenance-free, can be used in clean-rooms. They eliminate the huge risk of moving unstable-loads and greatly reduces the risk of tip-over hazards and injury.

There are two types of Machinery Sliders: Single direction of travel (point-shaped), and 360-degree multi-direction of travel (round shaped). The single direction machinery slider is 3/8" high (from ground up), 8-1/4" wide, 11-1/2" long to the point. The multi-directional slider is 1" high (from the ground up), and 8" in diameter. Best of all, Machinery Sliders are Made in the USA!

Machinery Sliders are made from a high-performance engineered plastic that is safe and light-weight. Machinery Sliders are so light-weight they can greatly reduce the risk of injury. Because of their size, they lower height clearance, are very easy to place into location and are quite versatile and can be used in many applications where traditional dollies and skates won't work.

Machinery Sliders removes the huge risk of machinery tip-over and unstable loads by removing the wheels from old-styled machinery dollies & skates! Machinery Sliders, are from 3/8" high for the single-directional and 1" high for the multi-directional. They are light-weight from 1-lb to 1.5lb and made of a high-performance resin plastic which make them extremely safe to use and very user-friendly.

Each Machinery Slider is capable of carrying approximately 10 ton. When heavier machinery is being moved, just add more Machinery Sliders. Normally, one Machinery Slider is sufficient under each leveling column of the machine being moved unless the machinery exceeds the capacity, then add more. Machinery Sliders can be used over all kinds of surfaces including damaged concrete, wood, tile, asphalt to a lesser capacity, and even carpet.