Items Description：
Item Type: Headlight Assembly
OE Part Number:TO2503286,TO2502286,201708290, 8115002S30, 201708190, 8111002S30
Condition: New
Warranty: 1 Year
To Fit: For Toyota Corolla L LE 2020-2021
Lighting Technology:LED
Housing Color:Black
Lens Color:Clear
Quantity Sold: 1 Right Side Headlight
Placement on Vehicle: Front,Right
Material: Plastic
Fitment:
For Toyota Corolla L LE 2020 2021
Package Includes:
1 Right Side Headlight
Tips:
-For other specifications of this part, please refer to the project specifications section.
-To confirm that the part is suitable for your vehicle, please enter the year, brand, model, interior and engine of your vehicle in the compatibility table.
- All services are for your better shopping experience, if you have any questions, please feel free to contact us, thank you very much!
Note：
Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
1.Find the adjustment screws：Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlights individually：The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field：The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4. Adjust the horizontal field：The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5.Test your results：If there is a problem after installation, please check whether the connection is correct. If you have any other questions, please feel free to contact us!
