• Do not look straight to the light. Use protective eyewear during operation.

• This UV radiation generated by this lamp is in risk group 1per ANSI or ESNA standard RP-27.3-96.

• Take also all suitable requirements recommended by the government safety code to avoid exposure to UV radiation or to a prolong inhalation of Ozone.

• Although our lamps are built with hard glass, there is a very small trace of Ozone generated by oxygen exposed to UV.

• When Lamp in use we recommend an adequate ventilation.

• Do not touch the lamp glass with the bare hands.

• Use appropriate protection, wires and insulated materials to avoid surge voltage from the lamp leads.

• Discard the lamps in accordance with safety code requirements.

• This lamp should not be used for cosmetic treatments, therapeutic or diagnostic purpose.

• Do not disassemble the ballast for any reason.

• Do not operate in presence flammable or explosive materials, liquid or fume.

• Intended for indoor use only. Do not use the ballast in wet or dump conditions.

• Do not expose/use lamp, ballast and wires in excessive heat, moisture, humidity, condensation, and other weather elements.

INSTRUCTIONS:

• Only qualified personnel should handle them.
• Use appropriate protection, wires and insulated materials to avoid surge voltage from the lamp leads.
• Do not touch the inverter or auxiliary circuits during operation. You are working with a high voltage device.