Rated Load: 30VDC/0.1A

Withstand voltage: 250VAC (50-60HZ) 1 min

Operating temperature: -25℃~85℃

Relative humidity: 85%

Life: >10,000 times

Action force: ≤3N

Contact resistance: ≤100mΩ

Insulation resistance: ≥100MΩ 

Switch Type: Latching / Momentary 

Latching : Self-locking switch generally refers to the switch comes with a mechanical locking function, press down, release the button is not completely jump up, in a locked state, need to press again, only to unlock completely jump up. It is called self-locking switch.

Momentary : Press to turn on, let go to disconnect, such as the doorbell switch is. A non-locking key switch can also be used with a relay or electronic circuit to achieve a self-locking circuit.

Solderability: In the solder melted at a temperature of 240±5℃ for the contact feet of the connector, the penetration time is 3±0.5S, and the tin-dipping area should account for more than 90% of the penetration area.

Soldering resistance: manual soldering temperature is controlled at 350 ± 5 ℃, time is 3 ± 0.5s, external temperature is controlled at 240 ± 5 ℃, time is 3 ± 1 s, no abnormal electrical performance after the test.

Vibration resistance: 50Hz amplitude of 2 mm, 5 minutes of vibration in 3 directions, no mechanical and electrical performance failures.

Salt spray test: when the concentration of the salt solution is 5±1% (mass percentage), the temperature is 35±2℃, and the temperature is kept for 24±1 hours. After the experiment, the deposits are washed away with water, and there are no obvious corrosion spots on the metal parts.

Description:

1)Terminals are insert molded for surface.
2)Features self-lock, white Knob, low contact resistance, small bouncing noise, high contact reliability.
3)Applied to home appliances and electrical products, such as audio, computer, office appliance, communication and measuring instruments, etc.