eBay

Specification:

Material: ABS
Color: Blue
Remote control frequency: 433mHZ
Applicable voltage: 12/24V automotive battery voltage
Switching current rating: 240A
Mid voltage: 11.8v-13.2v
Low voltage: less than 11.8v
Night voltage :13.3-18V Switching instantaneous current: 500A

Standby Current: 0.003A
Operating Temperature: 30℃-90 ℃

Suitable for: most 12V cars, boats, motorhomes, trailers, trucks, ATVs, UTVs, motorcycles

Function: The switch can solve the long-term parking, electronic equipment power consumption, line aging, forget to turn off the light caused by power consumption, and can extend the battery power and service life of the car.

Note: The remote control is only available at 11.8v-13.2v, other voltages are prohibited, make sure the voltage is matched, otherwise the remote control is unavailable

Features:

Detailed Specifications: Operates on 12V. Features 240A starting power, 500A instantaneous current, 11.9V±0.2V discharge threshold, 5-minute discharge delay cut-off, 160 feet remote control range, and IPX6 waterproof rating with audio-visual prompts.

Automatic Cut Off Battery: If the voltage is lower than 11.8V, the remote kill switch will automatically cut off the power supply after 120s to save electricity, if the voltage is higher than 13.2V, the remote control will be disabled to prevent accidental action to shut off the power while driving, and the power supply can only be controlled by the button on the switch.

Magnetic Latching Function:The automatic kill switch for car uses a new type of relay that controls circuit disconnection and cut-off by magnetic principle, with a standby current of 3mA, which is more energy-saving.

Protecting Automotive Battery:Using this car battery automatic kill switch can avoid power consumption due to long-term parking, good point of electronic equipment, line aging, forgetting to turn off the light, etc. It can effectively protect and prolong the life of car battery.

Safe & Easy Installation: Designed for harm-free installation with original wiring, eliminating the need for cutting or altering cables.
Energy-Efficient Operation: Utilizes pure copper double magnetic function for zero power consumption post-conduction, maintaining relay conduction and original memory state without power.

Broad Vehicle Compatibility: Suitable for various 12V systems in cars, trucks, boats, ATVs, and RVs, offering wide application flexibility.

Remote control matching instructions

1.Interlock mode (applicable to vehicle system control)-continuously press the manual key ON the code for 3 seconds and the indicator light flashes 3 times to enter the learning state, press the key ON the remote control, and then the indicator light flashes three times after the code is successfully aligned, then press another button on the remote control to code successfully after the indicator flashing three time.

2.After entering the learning state learning code indicator light within 30 seconds did not receive the remote control signal to automatically quit the learning state.

3.Clear code-long press the manual key ON to the code indicator flashing 8 times to indicate that the clear code is completed (long press the manual key ON to appear the indicator flashing 3 times, 4 times, 5 times, 8 times in turn; of which flashing 3 times is the interlock mode learning state, flashing 4 times is the self-lock mode learning state, flashing 5 times is the click-move mode learning state, flashing 8 times is the clear code state)

4.A set of 20 codes can be paired with 10 different remote controls at the same time.

Package Included:

1 * Switch
2 * Remote Control
1 * Manual
2 * Accessories