1、Easy to Use: Aluminum alloy QRM eliminator is inserted from the Transsmite Receive Unit into the antenna feedline without any other modifications to the radio.
2、Adjustment: Aluminum alloy signal canceller now allows adjustment of phase angle and amplification to eliminate unwanted signals before they arrive the front of the receiver.
3、Built in PTT Control: The aluminum alloy QRM eliminator has a built in PTT control that keeps the canceller connected during transmission.
4、Auxiliary Antenna: The QRM eliminator requires an additional auxiliary receiving antenna, such as a 2m/6.6ft antenna or a few meters of wire in a shed. The two antennas receive unwanted signals, resulting in different phases.
5、Wide Compatibility: The QRM eliminator contains the interface circuitry needed to work with most modern HF transceivers and is widely available.
Item Type: QRM Eliminator
Material: Aluminum Alloy, PCB
Impedance: 50Ω
Frequency Range: 1.8MHZ-30MHZ
Maximum Transmitting Power: 100W
Sound Interface: RCA (Can Be Connected to PTT)
Power Connector: 5.5x2.1mm Power Supply
Power Supply Voltage: DC 13.8V 150mA
1 x QRM Eliminator
3 x Antenna Adapter
1 x Antenna Line
1 x RCA Cable
1 x Power Cord