Features:
9005/H10/HB3 LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety
Especially designed for upgrading the Headlight
Bulb Size: 9005/H10/HB3
100% Brand New and High quality.
Use CSP Led technoloty, amazing super bright lighting
LED Type: LED chip high power
Application: Headlight
Beam Type: High And Low Beam / 360°Beam Angle
Color Temperature: Pure White 6000K
Lumens: 4000 Lumens Per Bulb
Working Voltage: DC 12V to 24V
40W Per Bulb, Low Power Consumption
No delay to light up, Faster on/off response time
Lifespan: 50,000 working hours ,Adopt imported chips, stable quality, long service life
Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required, easy installation.
Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
Package Includes :
2 x LED Bulbs 9005/H10/HB3 Pure White 6000K
New and old packaging will be shipped randomly
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the
bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior
SOME PROBLEMS FROM CUSTOMERS:
Q1: WHY MY LIGHTS ARE SO DIM ?
A: Most of the customers responded very brightly, and there have been a few customers who were in the same situation as you, and the reaction was not very bright. Later, after we fully understood, we found that because this light bulb is LED, the voltage requirement must reach 12-36V (brightness). brighter with higher voltage), while your raw halogen bulbs only need 9V to light up.
Because we send it out after 100% inspection before delivery, it is most likely caused by the insufficient voltage of your original lamp system. It is recommended that you or go to a professional auto repair shop to change the voltage of the bulb system, so that the lights can run brighter.
9005/H10/HB3 LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety
Especially designed for upgrading the Headlight
Bulb Size: 9005/H10/HB3
100% Brand New and High quality.
Use CSP Led technoloty, amazing super bright lighting
LED Type: LED chip high power
Application: Headlight
Beam Type: High And Low Beam / 360°Beam Angle
Color Temperature: Pure White 6000K
Lumens: 4000 Lumens Per Bulb
Working Voltage: DC 12V to 24V
40W Per Bulb, Low Power Consumption
No delay to light up, Faster on/off response time
Lifespan: 50,000 working hours ,Adopt imported chips, stable quality, long service life
Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required, easy installation.
Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
Package Includes :
2 x LED Bulbs 9005/H10/HB3 Pure White 6000K
New and old packaging will be shipped randomly
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the
bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior
SOME PROBLEMS FROM CUSTOMERS:
Q1: WHY MY LIGHTS ARE SO DIM ?
A: Most of the customers responded very brightly, and there have been a few customers who were in the same situation as you, and the reaction was not very bright. Later, after we fully understood, we found that because this light bulb is LED, the voltage requirement must reach 12-36V (brightness). brighter with higher voltage), while your raw halogen bulbs only need 9V to light up.
Because we send it out after 100% inspection before delivery, it is most likely caused by the insufficient voltage of your original lamp system. It is recommended that you or go to a professional auto repair shop to change the voltage of the bulb system, so that the lights can run brighter.
Q2: WHY THEY CANNOT BE LIGHTENED ?
A:This happens because your original halogen car lights have no positive and negative poles, but this is an LED light, which has positive and negative poles. A small number of customers (such as your car) happen to have the opposite positive and negative poles of our lights, which leads to non-lighting.
Don't worry, this situation is very easy to solve! You only need to lead a wire out of the positive and negative poles and reverse them to make the light bright. If you can't operate it yourself, we suggest that you can go to a professional auto repair shop to modify it, thank you!
Contact us:
If the product is not suitable or there is a quality problem, please contact our customer service directly to solve the problem. We will give you a satisfact.
On Dec 24, 2024 at 19:12:17 PST, seller added the following information:
On Dec 27, 2024 at 08:37:51 PST, seller added the following information: