Condition: BRAND NEW IN ORIGINAL PACKAGING

Warranty: 1 YEAR AUDIOSAVINGS

Package Includes:

• (1) Polk 12” Car/Marine Audio Subwoofer
• (1) Rockville 12" QBOMB Vented Sub Enclosure Box
• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

Authorized Polk Dealer!

Description for Polk Sub:

The Premium Upgrade
Tuned for the total sonic accuracy you get in a studio subwoofer, the MM1 Series reconfigures this kind of high-quality deep bass impact for an on-the-go listening experience that totally outperforms your OEM factory setup.

Advanced High-Performance Bass
Every element of the MM1 Series is meticulously engineered for thunderous bass, enhanced sonic detail and ultra-durable construction—Dynamic Balance technology, a high excursion bump stack motor structure, glass fiber formers, multilayered and oversized voice coils, high-temp Conex spiders, a vented pole and basket structure, and integrated fuses.

Ultra-Marine Certified
Featuring an IP56 rating that includes a non-corrosive fiberglass reinforced ABS basket, a water-proof surround, weep holes for proper drainage and a polypropylene cone, you get extra, long-lasting protection—that’s all salt-fog and UV tested.

Dynamic Balance Technology
Patented process that guides material selection through rigorous testing that identifies and cancels out unwanted resonant frequencies.

Included:

• Two 12" 4 ohm subwoofers
• Stainless steel mounting hardware

Features:

• Polk Audio MM1242SVC 12” 1260 Watt Single 4-Ohm Car/Marine Audio Subwoofer Sub
• Driver Compliment: 12" (304.8mm)
  
• Cutout Dimensions: 11" (282mm)
• Mounting Height: 0.55" (14.06mm)
  
• Mounting Depth (Top): 4.64" (118mm)
• Mounting Depth (Bottom): 5" (132mm)
• Peak Power Handling: 1260 Watts
• Continuous Power Handling: 420 Watts RMS
• Nominal Impedance: 4 Ohms
• Frequency Response: 26Hz-200kHz
  
• Sensitivity: 87 dB
• Magnet Weight: 54.4 oz
• Magnet Material: Ceramic
• Magnet Size: 140mm x 60mm x 25mm
• VC Diameter: 2"
• Enclosure Volumes:
  
• Minimum Sealed: 1.25 cu. ft.
  
• Maximum Sealed: 3.5 cu. ft.
  
• Minimum Vented: 1.75 cu. ft.
  
• Maximum Vented: 2.25 cu. ft.

Description for Rockville Enclosure: 

The RQB12 Qbomb single 12" vented enclosure is an incredibly well-built and durable sub enclosure. This box is finished with a bedliner spray which hardens to make this box weather resistant as well as making it almost impossible to break. The bedliner finish is the same material that the back of a pickup truck is made of.

This speaker box is made in the USA with Grade “A” ¾” MDF wood and then finished off with a thick bedliner finish. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RQB12 QBOMB Single 12" Vented Subwoofer Enclosure With Rhino Bedliner Finish
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
• Tuning frequency: 43Hz

Enclosure Measurements:

• Type of Enclosure: Vented
• Enclosure Sub Size: Single 12"
• Dimensions in Inches: 15" L x 22" W x 13.5 H"
• Top and Bottom Depth: 15"
• Mounting Depth: up to 8.75" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 2.5 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.8 Cubic Feet

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier.  This package is a top of the line accessory package which we put together and tested. 

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure.  The speaker wire is 14 gauge.  This is way better than using 16 gauge.  You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire.  These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio sign al cleanly.

AudioSavings Return Policy:

At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.

Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.

You may return this item for a refund within 30 DAYS of purchase.

Warranty Repair/Exchange Period: 1 YEAR

If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:

• We will send you a pre-paid shipping label to replace the item for a brand new one.
• We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
• If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.

Replacement/Processing Time:

Your replacement or refund will process within 3-5 business days of when we receive the item.

Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.

You MUST notify us within 48 hours if you receive an item that was damaged during shipping.

Process for returning items

Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility.